GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 700DC-P400Z2 |
Series: | 700DC |
Description:
The Allen-Bradley 700DC-P400Z2 is a DC-Operated Relay. This relay supports a voltage range from 230 Volts DC to 250 Volts DC. The device supports a maximum current of 10 Amperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 700DC-P400Z2 is considered as a DC-Operated Relay. This relay supports a voltage range from 230 Volts DC to 250 Volts DC. The device supports a maximum current of 10 Amperes. The 700DC-P400Z2 has four (4) N.O. contacts without N.C. contacts. These contacts are conceived with a gold-plated bifurcated material. This relay also has an open enclosure. The device can be mounted easily on a DIN rail. The relay offers a mechanical life of fifteen million operations with a switching time of 15 milliseconds to 30 milliseconds. The 700DC-P400Z2 provides a minimum pulse and a reset time of 75 milliseconds. The coil consumes a power of 19 Volt-amperes. This relay supports wires with a cross-section area range from 16 AWG to 10 AWG. The relay includes contact terminal screws to facilitate the wiring and continuity testing.
The 700DC-P400Z2 supports a non-condensing relative humidity range from 5 percent to 95 percent. The relay can be stored in a safe environment that should not be full of condensation or corrosion at a temperature from -55 degrees to 80 degrees Celsius (-67 degrees to 176 degrees Fahrenheit). The 700DC-P400Z2 supports a torque of 1 Newton-meter to 2.5 Newton-meters. This device is a DC-operated relay. The relay can be employed for machine tools and can be involved in heavy-duty applications. The device includes wide single-contact pads on each side of the spanner. The relay can operate at a temperature range of -25 degrees to 60 degrees Celsius (-13 degrees to 140 degrees Fahrenheit) for applications and weighs approximately 1.35 kilograms (2.97 pounds) while shipping.
Brand | Allen-Bradley / Rockwell Automation |
Series | 700DC-P |
Part Number | 700DC-P400Z2 |
Description | DIN Rail Relay |
Relay Type | DC-Operated Relay |
Contacts | 4 x N.O. - 0 x N.C. |
Voltage Rating | 230 Volts DC - 250 Volts DC |
Current Rating | 10 Amperes |
Operating Time | 15 to 30 milliseconds |
Mechanical Life | 15 million operations |
Coil Voltage | 24 Volts DC |
Weight | 1.35 Kilograms (2.97 pounds) |
Question: Does Automation Stop offer repairs on the 700DC-P400Z2?
Answer: Yes. We offer repairs for the 700DC-P400Z2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 700DC-P400Z2?
Answer: If you buy the 700DC-P400Z2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 700DC-P400Z2 online?
Answer: Yes. Automation Stop sells the 700DC-P400Z2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 700DC-P400Z2?
Answer: The 700DC-P400Z2 is made by Allen Bradley - Miscellaneous.
Question: What Brand does the 700DC-P400Z2 have?
Answer: The 700DC-P400Z2 has a AB / Rockwell Automation Brand.
Question: What is the Coil Voltage of the 700DC-P400Z2?
Answer: The Coil Voltage of the Rockwell Automation 700DC-P400Z2 is 24 Volts DC (direct current).
Question: What is the Contacts of the Allen Bradley Automation 700DC-P400Z2?
Answer: The Contacts of the 700DC-P400Z2 is 4 x N.O. - 0 x N.C..
Question: What is the Current Rating of the 700DC-P400Z2?
Answer: The Allen Bradley-Rockwell Automation 700DC-P400Z2 has a Current Rating of 10 Amperes.
Question: What Description is included with the Allen-Bradley 700DC-P400Z2?
Answer: The 700DC-P400Z2 has a DIN Rail Relay Description.
Question: What is the Mechanical Life of the Allen Bradley 700DC-P400Z2?
Answer: The Allen Bradley 700DC-P400Z2 has a Mechanical Life of 15 million operations.
Question: What is the Operating Time of the Allen Bradley/Rockwell Automation 700DC-P400Z2?
Answer: The Allen Bradley/Rockwell Automation 700DC-P400Z2 has a Operating Time of 15 to 30 milliseconds.
Question: What is the unit Number of the Allen Bradley/Rockwell Automation 700DC-P400Z2?
Answer: The Allen Bradley/Rockwell Automation 700DC-P400Z2 has a unit Number of 700DC-P400Z2.
Question: What Relay Type is included with the Rockwell Automation 700DC-P400Z2?
Answer: The Rockwell Automation 700DC-P400Z2 has a direct current-Operated Relay Relay Type.
Question: What Voltage Rating does the 700DC-P400Z2 have?
Answer: The Voltage Rating of the Rockwell Automation 700DC-P400Z2 is 230 Volts DC - 250 Volts DC.
Question: What is the Weight of the 700DC-P400Z2?
Answer: The 700DC-P400Z2 has a Weight of 1.35 Kilograms (2.97 pounds).
For additional information about 700DC-P400Z2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 700DC-P400Z2.
Revision Part # | Also Known As | Availability |
---|---|---|
700DC-P400Z2/A | 700DC-P400Z2 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.