GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 700DC-P400Z24 |
Series: | 700DC |
Description:
The 700DC-P400Z24, which was designed and produced by Allen Bradley, is a heavy-duty industrial grade relay. It is a product of the 700-P NEMA heavy-duty industrial controlling relay product sequences. It has four N.O. contacts, a current rating of 10 amps AC, and a coil voltage rating of 24 volts DC. It necessitates the use of an open-style relay rail mount enclosure. This 700DC-P400Z24 module meets or exceeds all applicable CE, CSA, CUL, KC, and UL standards, as well as finger-safe safety requirements.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 700DC-P400Z24 is a direct current control relay that is intended for use in heavy-duty industrial relay operations. It is an Swbd ElecHld controlled relay with a 24V DC coil voltage, a 10 amps AC current rating, and four normally open (N.O.) contacts with a 10-amp AC contact rating. The 700DC-P400Z24 is a relay module with conventional and time delay connections. It is equipped with DC control voltage, which is a product of Bulletin 700DC sequences. The Bulletin 700-P series relays are equipped with standard, 10-amp contact cartridges and have a bifurcated and double-break design. The bifurcation of the contacts ensures high contact durability and minimal contact bounce, while the double-break contact design eliminates the danger of contacts welding and improves the relay's capacity to break DC circuits.
This module is factory configured for field assembly at 120V AC and 24V DC. This 700DC-P400Z24 is ideal for machine tools and other high-performance applications. This relay complies with NEMA and IEC standards and is constructed of robust materials. It is compatible with ring tongue terminals and has a finger-safe safety standard. The 700DC-P400Z24 operates at a maximum of 600V AC/DC. On AC relays, this heavy-duty industrial relay has an incorporated DIN Rail adaptor, and the open-type relay shell includes rail mounting characteristics. It is recommended that the logic reed cartridge not be installed in a relay, unit, or other devices that is next to a Bulletin 700 Type R, RM, or RTC sealed contact relay or other devices with a significant magnetic leakage field. Therefore, unpredictable contact activity may occur because logic reeds function with a negligible amount of force. Additionally, blank relays in all coil voltages are available for field setup.
Question: Does Automation Stop offer repairs on the 700DC-P400Z24?
Answer: Yes. We offer repairs for the 700DC-P400Z24 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 700DC-P400Z24?
Answer: If you buy the 700DC-P400Z24 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 700DC-P400Z24 online?
Answer: Yes. Automation Stop sells the 700DC-P400Z24 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 700DC-P400Z24?
Answer: The 700DC-P400Z24 is made by Allen Bradley - Miscellaneous.
For additional information about 700DC-P400Z24 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 700DC-P400Z24.
Revision Part # | Also Known As | Availability |
---|---|---|
700DC-P400Z24/A | 700DC-P400Z24 Ser A, Series A, Rev A | Request a Quote |
700DC-P400Z24/B | 700DC-P400Z24 Ser B, Series B, Rev B | Request a Quote |
700DC-P400Z24/C | 700DC-P400Z24 Ser C, Series C, Rev C | Request a Quote |
700DC-P400Z24/D | 700DC-P400Z24 Ser D, Series D, Rev D | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.