GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800G-DLSW |
Series: | 800G |
Description:
Designed and manufactured by Allen Bradley / Rockwell Automation, product number 800G-DLSW is a 30 mm LED power module. This device was designed for zone 1 and 2 hazardous locations. This module has latch mounting capabilities with a 3-meter screw termination. This module has a white lamp. It is used with a pilot light. This module has a voltage rating of 12 to 60 volts DC and 12 to 250 volts AC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 800G-DLSW is a 30-millimeter LED power module as part of the 800G series of products. This LED power module is designed for operation in hazardous locations classified as zone 1 and zone 2. The LED power module has latch mounting capabilities with screw termination. The lamp used in the LED power module is white in color. The LED power module is designed to be used with a pilot light. The LED power module has a rated insulation voltage of 300 volts. The module consumes a maximum of 1 watt of power. Its rated voltage is 12 to 60 volts direct current (DC) and 12 to 250 volts alternating current (AC). The LED power module has a cable termination length of 3 meters.
The 800G-DLSW LED power module has a cable termination specified as catalog number 800G-DLC3W. The module supports cable sizes of 2.5 mm² (12 AWG) for stranded max. The LED power module has a design life of 100,000 hours. The module is enclosed in a thermoplastic material housing. The LED power module is designed for a protection degree of IP20. It can be stored or transported in temperatures ranging from -55 to +70 degrees Celsius, or the equivalent temperature range of -67 to +158 degrees Fahrenheit. Additionally, this LED power module can withstand a shock rated up to 30 G for a duration of 18 milliseconds. The Allen Bradley 800G-DLSW LED power module has various certifications, including the c-UL-US, Class 1 Div 2 certification for all applicable directives.
Question: Does Automation Stop offer repairs on the 800G-DLSW?
Answer: Yes. We offer repairs for the 800G-DLSW and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800G-DLSW?
Answer: If you buy the 800G-DLSW through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800G-DLSW online?
Answer: Yes. Automation Stop sells the 800G-DLSW online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800G-DLSW?
Answer: The 800G-DLSW is made by Allen Bradley - Miscellaneous.
For additional information about 800G-DLSW check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800G-DLSW.
Revision Part # | Also Known As | Availability |
---|---|---|
800G-DLSW/A | 800G-DLSW Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.