GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800H-AR2D1P |
Series: | 800H |
Description:
The Allen-Bradley 800H-AR2D1P is a black Momentary Contact Push Button with a single position. This button has a plastic flush head. This non-illuminated device is conceived with a sealed switch contact block. The 800H-AR2D1P has a single N.O. contact. The device has a flush head with a diameter of 30.5 millimeters (1.2 inches). This button device weighs approximately 90 grams (0.2 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 800H-AR2D1P is a black Momentary Contact Push Button with a single position. This button has a plastic flush head. This non-illuminated device is conceived with a sealed switch contact block. The 800H-AR2D1P has a single N.O. contact. The device has a flush head with a diameter of 30.5 millimeters (1.2 inches). This flush head button can be employed in many industrial applications such as in conjunction with a PLC controller. This non-illuminated device comes without finger-safe guards on terminals. The 800H-AR2D1P offers an electrical isolation of 2200 Volts with electrical life cycles of one million and mechanical life cycles of two years. This device supports wires with a cross-section area range from 18 AWG to 14 AWG. The flush head cap has a black color without illumination.
The 800H-AR2D1P can be stored in a safe environment that shouldn’t be full of condensation or corrosion at a temperature from -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). This one-position button offers an operating force of 1.36 Kilograms (3 pounds) at plunger travel of 5.2 millimeters (0.205 inches). The device supports a vibration frequency range from 10 Hertz to 2 Kilohertz. The button supports a non-condensing relative humidity range from 50% to 95%. The contacts support a voltage of either 300 Volts DC or 600 Volts AC with a maximum current of 30 Amperes for make, 3 Amperes for break, and 5 Amperes DC. This momentary push-button operates at a temperature range of -40 to 55 degrees Celsius (-40 to 131 degrees Fahrenheit) and weighs approximately 90 grams (0.2 pounds) while shipping.
Brand | Allen-Bradley / Rockwell Automation |
Series | 800H |
Part Number | 800H-AR2D1P |
Description | Non-Illuminated Momentary Contact Push Button |
Contact Type | 1 N.O. |
Finger-Safe Guards | No guards on terminals |
Material Type | Plastic, Type 4/4X/13 |
Head Type | Non-illuminated flush head |
Color Cap | Black |
Contact Block | Sealed Switch |
Voltage Rating | 600 VAC / 300 VDC |
Current Rating | 30 Amperes for make / 3 Amperes for Break / 5 Amperes DC |
Typical Operating Forces | 3 pounds max. at 0.205 inches plunger travel |
Operating Temperature | -40 to 55 degrees Celsius (-40 to 131 degrees Fahrenheit) |
Weight | 90 grams (0.20 pounds) |
Question: Does Automation Stop offer repairs on the 800H-AR2D1P?
Answer: Yes. We offer repairs for the 800H-AR2D1P and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800H-AR2D1P?
Answer: If you buy the 800H-AR2D1P through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800H-AR2D1P online?
Answer: Yes. Automation Stop sells the 800H-AR2D1P online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800H-AR2D1P?
Answer: The 800H-AR2D1P is made by Allen Bradley - Miscellaneous.
Question: What Brand is included with the Allen Bradley-Rockwell Automation 800H-AR2D1P?
Answer: The 800H-AR2D1P has a Allen Bradley / Rockwell Automation Brand.
Question: What colored Cap is included with the Allen Bradley/Rockwell Automation 800H-AR2D1P?
Answer: The Allen Bradley/Rockwell Automation 800H-AR2D1P has a Black colored Cap.
Question: What Contact Block is included with the 800H-AR2D1P?
Answer: The Allen Bradley/Rockwell Automation 800H-AR2D1P has a Sealed Switch Contact Block.
Question: What is the Contact Type of the 800H-AR2D1P?
Answer: The Contact Type of the Allen Bradley/Rockwell Automation 800H-AR2D1P is 1 N.O..
Question: What is the Current Rating of the Allen Bradley/Rockwell Automation 800H-AR2D1P?
Answer: The 800H-AR2D1P has a Current Rating of 30 Amperes for make / 3 Amperes for Break / 5 Amperes direct current.
Question: Does the 800H-AR2D1P have a Description?
Answer: Non-Illuminated Momentary Contact Push Button.
Question: Does the 800H-AR2D1P have a Finger-Safe Guards?
Answer: No guards on terminals.
Question: Does the 800H-AR2D1P have a Head Type?
Answer: Non-illuminated flush head.
Question: What is the Material Type of the Allen Bradley Automation 800H-AR2D1P?
Answer: The Material Type of the Allen Bradley Automation 800H-AR2D1P is Plastic, Type 4/4X/13.
Question: What is the Operating Temperature of the Rockwell-Automation 800H-AR2D1P?
Answer: The Operating Temperature of the 800H-AR2D1P is -40 to 55 degrees Celsius (-40 to 131 degrees Fahrenheit).
Question: What is the component Number of the 800H-AR2D1P?
Answer: The Allen Bradley/Rockwell Automation 800H-AR2D1P has a unit Number of 800H-AR2D1P.
Question: What Typical Operating Forces does the Allen Bradley-Rockwell Automation 800H-AR2D1P have?
Answer: The Allen Bradley-Rockwell Automation 800H-AR2D1P has a Typical Operating Forces of 3 pounds max. at 0.205 inch plunger travel.
Question: What is the Voltage Rating of the Allen Bradley Automation 800H-AR2D1P?
Answer: The 800H-AR2D1P has a Voltage Rating of 600 voltage alternating current (VAC) / 300 VDC.
Question: What Weight does the Allen Bradley-Rockwell Automation 800H-AR2D1P have?
Answer: The Weight of the Allen Bradley-Rockwell Automation 800H-AR2D1P is 90 grams (0.20 pounds).
For additional information about 800H-AR2D1P check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800H-AR2D1P.
Revision Part # | Also Known As | Availability |
---|---|---|
800H-AR2D1P/A | 800H-AR2D1P Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.