GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800H-DR6 |
Series: | 800H |
Description:
This is the 800H-DR6 push button that is part of the Bulletin 800H product lineup. This 30-millimeter momentary contact button is produced by Allen-Bradley. It has a red mushroom operator head made out of Thermoplastic Polyester and is a non-illuminated model. This unit is built to last for up to ten million (10,000,000) operations and has a Type 4, 4X, and 13 protection rating. It has been tested to withstand shocks of up to 100 G and vibrations of up to 10 G.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 800H-DR6 is a 30-millimeter push button made by Allen-Bradley. It is included in the Bulletin 800H series of 30-millimeter buttons. This component is a momentary contact type red button that does not include an indicator light. This button has a minimum contact rating of 24 volts with a minimum input current of at least 24 milliamperes. The maximum supported thermal continuous current rating is 10 amperes AC and 2.5 amperes DC. This unit is made out of plastic and has a mushroom type of operator head. The operator head is made out of Thermoplastic Polyester and the unit has a protection rating conforming to Type 4, 4X, and Type 13. The unit has been tested to withstand vibrations with a magnitude of up to 10 G. The tested frequency range is between 10 hertz and 2000 hertz with a maximum displacement of 0.06 inches, or 1.52 millimeters. This unit is able to withstand a shock rated up to 100 G without damage. It has been designed to have a mechanical life of up to ten million (10,000,000) operations. The typical operating force limit for this unit is 2 pounds maximum. The dielectric strength rating is 2200 volts for up to one (1) minute. The supported wire gauge is #18 to 14 AWG with a terminal screw torque between 6 to 8 pound-inches. The operating temperature range for this button is between -40 degrees and +104 degrees Fahrenheit (-40 degrees to +40 degrees Celsius). The non-operational storage temperature range is between -40 degrees and +185 degrees Fahrenheit (-40 degrees to +85 degrees Celsius).
Question: Does Automation Stop offer repairs on the 800H-DR6?
Answer: Yes. We offer repairs for the 800H-DR6 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800H-DR6?
Answer: If you buy the 800H-DR6 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800H-DR6 online?
Answer: Yes. Automation Stop sells the 800H-DR6 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800H-DR6?
Answer: The 800H-DR6 is made by Allen Bradley - Miscellaneous.
For additional information about 800H-DR6 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800H-DR6.
Revision Part # | Also Known As | Availability |
---|---|---|
800H-DR6/A | 800H-DR6 Ser A, Series A, Rev A | Request a Quote |
800H-DR6/B | 800H-DR6 Ser B, Series B, Rev B | Request a Quote |
800H-DR6/C | 800H-DR6 Ser C, Series C, Rev C | Request a Quote |
800H-DR6/D | 800H-DR6 Ser D, Series D, Rev D | Request a Quote |
800H-DR6/E | 800H-DR6 Ser E, Series E, Rev E | Request a Quote |
800H-DR6/F | 800H-DR6 Ser F, Series F, Rev F | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.