GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800H-WK4 |
Series: | 800H |
Description:
Part number 800H-WK4 is an Allen Bradley momentary contact flip lever device as part of the 800H product series. It has a gray color flip lever. However, this device does not have fingersave guards or a contact block module. This product has a dielectric strength rated at 2200 volts that can be sustained for one (1) minute. This device has physical dimensions that measure 71.3 mm x 44.5 mm x 46 mm. The shipping weight of this device is approximately 8 pounds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 800H-WK4 is a button device, manufactured by Allen Bradley. It belongs to the Bulletin 800H series of 30-millimeter push buttons. The 800H-WK4 is a part of the specialty products product series and is called a momentary contact flip lever device. The button operation is performed by flip lever operator that is colored in gray and does not possess operator legend description. A number of factory-marked operators are available to purchase separately, including some of the widely used markings like START, STOP, CLOSE, RESET descriptions. There are a total of 38 different legend descriptions to choose from. A snap-on accessory that provides IEC, IP2X and VGB finger save protection, called Fingersave guards, is not featured on this device. This flip button device does not have integrated contact blocks. The unit is placed in enclosure Type 1/4/4X/12/13 according EN60529 IP66. It has a dielectric strength of 2200 volts that can be sustained for one (1) minute.
It is a non-illuminated button unit that has an expected mechanical lifetime of two hundred thousand (200,000) operations. It is non-explosion proof device, designed not to operate in hazardous areas. It has a surrounding air operational temperature range of -40 to 131 degrees Fahrenheit, or -40 to 55 degrees Celsius. This unit has physical dimensions that measure 2.81 inches x 1.75 inches x 1.81 inches, or the equivalent of 71.3 millimeters x 44.5 millimeters x 46 millimeters. Additionally, this device has a shipping weight of approximately 8 pounds, or 0.14 kilograms. The flip lever button has a standard compliance with UL 508, CCC, and is certified UL listed, CSA, and CE marked.
Question: Does Automation Stop offer repairs on the 800H-WK4?
Answer: Yes. We offer repairs for the 800H-WK4 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800H-WK4?
Answer: If you buy the 800H-WK4 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800H-WK4 online?
Answer: Yes. Automation Stop sells the 800H-WK4 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800H-WK4?
Answer: The 800H-WK4 is made by Allen Bradley - Miscellaneous.
For additional information about 800H-WK4 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800H-WK4.
Revision Part # | Also Known As | Availability |
---|---|---|
800H-WK4/A | 800H-WK4 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.