GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800S-2SB |
Series: | 800S |
Description:
The 800S-2SB is a contact push button used to configure the momentary contact buttons, especially from the type 1 units. This push button is part of the 800S line of accessory components. It contains a NEMA type 1 enclosure. This item can provide momentary switch features to the circuits by keeping contact suppression. Please note that this contact push button needs operator level control for its forwarding and reversing functions.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 800S-2SB is a momentary contact button, or also known as a push button station. This device was designed and produced by the company known as Allen Bradley / Rockwell Automation. It is used for the configuration of standard duty type 1 stations. These stations generally provide basic switching mechanisms to the circuits and are used to secure continuous compression to keep the contacts within the circuit. In addition to that, this momentary contact push button is also used to provide intelligent control. This Allen Bradley module belongs to the Bulletin 800S series of products. It may be important to note that this module, in particular, is also used to cover the F-21738 nameplate. Apart from that, the most notable operations of this part are to provide monetary support, such as forward and reverse mechanisms to the circuit by keeping compression contact on the circuits to the compatible momentary operated buttons. In addition to that, this Bulletin 800S momentary contact button offers a compact design structure. This contact button is quite handy, flexible, and easy to manage. Its contact with the operators is not hazardous, nor is it an ESD sensitive unit. However, the manufacturer's recommendations for mounting 800S parts with other devices are covered in detail in the product series manual. Additionally, it is important for the operators to follow all the guidelines for ensuring adequate safety in order to avoid unnecessary malfunctions. The Allen Bradley 800S-2SB momentary contact button has an enclosure that has a rating of NEMA Type 1.
Question: Does Automation Stop offer repairs on the 800S-2SB?
Answer: Yes. We offer repairs for the 800S-2SB and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800S-2SB?
Answer: If you buy the 800S-2SB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800S-2SB online?
Answer: Yes. Automation Stop sells the 800S-2SB online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800S-2SB?
Answer: The 800S-2SB is made by Allen Bradley - Miscellaneous.
Question: What can I expect the voltage included with the 800S-2SB to be?
Answer: The 800S-2SB by Allen Bradley - Miscellaneous has a voltage of 600.
For additional information about 800S-2SB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800S-2SB.
Revision Part # | Also Known As | Availability |
---|---|---|
800S-2SB/A | 800S-2SB Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.