GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 802X-WS14 |
Series: | 802X |
Description:
Product number 802X-WS14 is a single-pole, cat-whisker limit switch. This product was designed and manufactured by Allen Bradley / Rockwell Automation. The rated torque/force to operate this product is 0.51 Newton-meters, or 4.5 lb-in. This limit switch has a 2circuit contact configuration. It has a NEMA Type 4/13 enclosure with an Ingress Protection rating of IP66. It has physical dimensions that measure 57.15 mm x 69.8 mm x 153.41 mm.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Manufactured by Allen Bradley / Rockwell Automation, product number 802X-WS14 is a NEMA Type 4 limit switch. This single pole switch has cat whisker, or wire-type, actuation. This switch has an AC contact rating of 60/ 6.00 amperes (make / break) at 120 volts. Its continuous carrying current rating is 10 amperes with a make / break rating of 7200/ 720 volt-amperes. This switch has a 2-circuit contact configuration with a A600 contact rating. The maximum travel of this Allen Bradley device is rated at 10 degrees. This switch’s maximum travel to reset contacts is rated at 4°, while the maximum travel to operate contacts is rated at 9 degrees. This Allen Bradley switch has a TC connection. The maximum rated torque of the 802X-WS14 switch's contacts is 0.51 Nm (Newton-meters), or the equivalent of 4.5 lb-in.
The 802X-WS14 limit switch has an oil tight / watertight construction and is packaged in a NEMA Type 4/13 metal enclosure for environmental protection. The enclosure also has an Ingress Protection rating of IP66. The series 1 switch is designed for operation in hazardous locations. When operating this product, the temperature of the surrounding environment should range from -25 to 65 degrees Celsius, or the equivalent temperature range of -13 to 149 degrees Fahrenheit. The physical dimensions of this Allen Bradley limit measure 57.15 millimeters x 69.8 millimeters x 153.41 millimeters, or 2.25 inches x 2.94 inches x 6.04 inches. This product has an approximate weight of 0.9 kilograms, or roughly 2 pounds.
Question: Does Automation Stop offer repairs on the 802X-WS14?
Answer: Yes. We offer repairs for the 802X-WS14 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 802X-WS14?
Answer: If you buy the 802X-WS14 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 802X-WS14 online?
Answer: Yes. Automation Stop sells the 802X-WS14 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 802X-WS14?
Answer: The 802X-WS14 is made by Allen Bradley - Miscellaneous.
Question: What voltage does the Allen Bradley - Miscellaneous 802X-WS14 have?
Answer: The 802X-WS14 includes a voltage of 600.
For additional information about 802X-WS14 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 802X-WS14.
Revision Part # | Also Known As | Availability |
---|---|---|
802X-WS14/A | 802X-WS14 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.