GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

836T-T254J

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 836T-T254J
Series: 836T

Description:

The Bulletin 836T-T254J pressure controller involves an electrical control circuit with copper alloy bellows actuator to monitor pneumatic parameters (air, vapor, and gases) or hydraulic parameters (water, oil, and liquids) in industrial heavy-duty, pneumatic, hydraulic applications. The 836T-T254J supports an adjustable pressure range of 20 psi to 300 psi. The 836T-T254J pressure controller includes a two-circuit contact. The 836T-T254J supports a line pressure of 600 psi and a surge pressure of 750 psi. This pressure controller operates at a temperature range of -30 degrees to 66 degrees Celsius (-22 degrees to 150 degrees Fahrenheit) for industrial applications and weighs approximately 1.6 kilograms (3.5 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Bulletin 836T-T254J pressure controller involves an electrical control circuit with copper alloy bellows actuator to monitor pneumatic parameters (air, vapor, and gases) or hydraulic parameters (water, oil, and liquids) in industrial heavy-duty, pneumatic, hydraulic applications. The 836T-T254J supports an adjustable pressure range of 20 psi to 300 psi. The 836T-T254J pressure controller includes a two-circuit contact device that has one NO and one NC contacts for SPDT operation. The two-circuit contact device of the 836T-T254J supports a voltage rating of 600 Volts AC or DC. The 836T-T254J supports a line pressure of 600 psi and a surge pressure of 750 psi. The 836T-T254J pressure controller has a ¼-inch female pipe thread pressure connection. The 836T-T254J can be installed rapidly without removing its front cover to protect the internal circuitry.

The 836T-T254J pressure controller includes a pilot light indicator. The 836T-T254J pressure controller can be employed to control high and low pressures in air compressors and vacuum transfer systems. The 836T-T254J pressure controller includes an adjustment screw which allows tuning the trip setting to tune the higher pressure value by changing the internal spring. The 836T-T254J pressure controller includes an external differential adjustment screw which allows tuning the reset setting to tune the lower pressure value. This pressure controller operates at a temperature range of -30 degrees to 66 degrees Celsius (-22 degrees to 150 degrees Fahrenheit) for industrial applications and weighs approximately 1.6 kilograms (3.5 pounds) while shipping.

Technical Specifications

Brand Allen-Bradley / Rockwell Automation
Series Bulletin 836T pressure control with copper alloy bellows
Part Number 836T-T254J
Style of device Pressure control
Operator type Copper alloy bellows
Enclosure type 1, 4 & 13 Industrial use
Contact block type 2-circuit contact block - standard, S.P.D.T.
Adjustable operating range 20…300 psi
Adjustable differential 10…55 psi
Line pressure 600 psi
Occasional surge pressure 750 psi
Ambient operating temperature -22…+150 °F (-30…+66 °C)
-22…+200 °F (-30…+93 °C) Accessories/ Modifications
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 836T-T254J?

Answer: Yes. We offer repairs for the 836T-T254J and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 836T-T254J?

Answer: If you buy the 836T-T254J through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 836T-T254J online?

Answer: Yes. Automation Stop sells the 836T-T254J online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 836T-T254J?

Answer: The 836T-T254J is made by Allen Bradley - Miscellaneous.


Question: What -22…+200 °F (-30…+93 °C) is included with the 836T-T254J?

Answer: The 836T-T254J has a Accessories/ Modifications -22…+200 °F (-30…+93 °C).


Question: What is the Adjustable operating range of the 836T-T254J?

Answer: The 836T-T254J has a Adjustable operating range of 20…300 psi.


Question: What Adjustable differential does the Allen-Bradley 836T-T254J have?

Answer: The 836T-T254J has a Adjustable differential of 10…55 psi.


Question: What Ambient operating temperature does the 836T-T254J have?

Answer: The 836T-T254J has a Ambient operating temperature of -22…+150 °F (-30…+66 °C).


Question: What Brand is included with the 836T-T254J?

Answer: The 836T-T254J has a Allen Bradley / Rockwell Automation Brand.


Question: What is the Contact block type of the Allen Bradley Automation 836T-T254J?

Answer: The Contact block type of the Allen Bradley Automation 836T-T254J is 2-circuit contact block - standard, S.P.D.T..


Question: What is the Enclosure type of the 836T-T254J?

Answer: The 836T-T254J has a Enclosure type of 1, 4 & 13 Industrial use.


Question: What is the Line pressure of the 836T-T254J?

Answer: The 836T-T254J has a Line pressure of 600 psi.


Question: What is the Occasional surge pressure of the 836T-T254J?

Answer: The 836T-T254J has a Occasional surge pressure of 750 psi.


Question: What Operator type is included with the Allen Bradley/Rockwell Automation 836T-T254J?

Answer: The 836T-T254J has a Copper alloy bellows Operator type.


Question: What unit Number does the 836T-T254J have?

Answer: The part Number of the Allen Bradley 836T-T254J is 836T-T254J.


Question: What Style of device is included with the Allen Bradley 836T-T254J?

Answer: The Allen Bradley 836T-T254J has a Pressure control Style of device.


Series information for 836T-T254J

For additional information about 836T-T254J check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 836T-T254J.

Revision Part # Also Known As Availability
836T-T254J/A 836T-T254J Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 836T-T2S4J
  • 83GT-T254J
  • 83GT-T2S4J
  • B36T-T254J
  • B36T-T2S4J
  • B3GT-T254J
  • B3GT-T2S4J

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP