GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 845H-SJDZ13CMY1C |
Series: | 845H |
UPC: | 10662468377109 |
Description:
Part number 845H-SJDZ13CMY1C is an optical incremental encoder that was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This device can be mounted via a square flange. It has a diameter that measures 3/8 inches. The resolution of this device is 500 pulses per revolution. This optical incremental encoder has an operating temperature that should range from 0 to 60 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 845H-SJDZ13CMY1C is an optical incremental encoder whose mechanism of operation is by transforming the shaft’s angular position into digital signals with the aid of an optical disk. The number of pulses given off is dependent on the number of revolutions of the shafts. The resolution rating is given as 500 pulses per revolution, and it has an axial connector at the end as a type of connection. It operates under a power supply of 5 volts direct current (DC) with plus or minus 5 percent at a maximum current of 150 milliamperes. The mounting option is a square flange. The response of the frequency is given as 210 kilohertz. It has an NPN current sink as the output drive whose rating is 20 milliamperes.
The torque required to start the device and run it is given as 2.5 Newton-centimeters (N-cm) with the speed of the slew being 6000 revolutions per minute (rpm). The size of the shaft for this optical incremental encoder is given as 3/8 inches in diameter. This device is housed in a NEMA type 4 and 13 enclosure with an Ingress Protection rating of IP66. This encoder should be operated in an environment where the temperature ranges from 0 to 60 degrees Celsius. Also, it should be stored in an environment where the temperature ranges from -25 to 90 degrees Celsius. The humidity should be 98% with no condensation. It can withstand a shock rated up to 50 G for an 11-second duration. It can also withstand a vibration rated up to 20 G at a frequency of 4 to 2000 hertz.
Question: Does Automation Stop offer repairs on the 845H-SJDZ13CMY1C?
Answer: Yes. We offer repairs for the 845H-SJDZ13CMY1C and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 845H-SJDZ13CMY1C?
Answer: If you buy the 845H-SJDZ13CMY1C through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 845H-SJDZ13CMY1C online?
Answer: Yes. Automation Stop sells the 845H-SJDZ13CMY1C online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 845H-SJDZ13CMY1C?
Answer: The 845H-SJDZ13CMY1C is made by Allen Bradley - Miscellaneous.
For additional information about 845H-SJDZ13CMY1C check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 845H-SJDZ13CMY1C.
Revision Part # | Also Known As | Availability |
---|---|---|
845H-SJDZ13CMY1C/A | 845H-SJDZ13CMY1C Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.