GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

871C-DT5NP18-D4

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 871C-DT5NP18-D4
Series: 871C

Description:

Part 871C-DT5NP18-D4 is an extended temperature tubular sensor. This device was designed and manufactured by Allen Bradley / Rockwell Automation. This tubular sensor has a barrel diameter that measures 18 millimeters, or the equivalent of 0.71 inches. This sensor has a nominal sensing distance of 5 millimeters. The switching frequency of this device is 1000 hertz (Hz). The recommended cord size for this sensor is 2 meters, or 6.5 feet.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$206.00

Available: 11

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$149.00

Available: 3

What is Refurbished

Your order will ship by . Need it faster?

Looking for a 871C-DT5NP18-D4? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 871C-DT5NP18-D4 is an extended temperature tubualr sensor that was designed and manufactured by Allen Bradley / Rockwell Automation. The Allen Bradley 871C-DT5NP18-D4 has a repeatability rating in the range of ≤10%. It can absorb a vibration rating of 55 hertz at a 1-millimeter amplitude on 3 planes. The Hysteresis rating on this extended temperature tubular sensor is ≤15% typically. It can absorb a shock rating of 30 G for 11 milliseconds. It comes with a wide selection of protection such as transient noise, false pulse, short circuit, reverse polarity, and overload. This module comes with CE certification for all applicable directives.

The Allen Bradley 871C-DT5NP18-D4 can be placed inside an enclosure with a NEMA 1, 2, 3, 4, 12, or 13 rating, or an IP67 rating. This tubular sensor is made out of threaded nickel-plated brass barrel. For connection, this tubular sensor comes with a default 2-meter long wire. The port has a 4-pin M12 micro style. There is one (1) LED (light emitting diode) indicator on this module as well. When this sensor detects energized power, it will light up the orange LED. The operating temperature range for this tubular sensor is -40 to +100 degrees Celsius (-40 to +212 degrees Fahrenheit). 

The correction factors for the Allen Bradley 871C-DT5NP18-D4 are as follows: steel is 1.0, stainless steel is 0.9, brass is 0.5, aluminum is 0.45, and copper is 0.4. The 871C-DT5NP18-D4 supports a switching frequency of 1,000 hertz. The barrel diameter of this tubular sensor measures 18 millimeters, or the equivalent of 0.71 inches. The recommended cord size for this sensor is 2 meters (6.5 feet). 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 871C-DT5NP18-D4?

Answer: Yes. We offer repairs for the 871C-DT5NP18-D4 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 871C-DT5NP18-D4?

Answer: If you buy the 871C-DT5NP18-D4 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 871C-DT5NP18-D4 online?

Answer: Yes. Automation Stop sells the 871C-DT5NP18-D4 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 871C-DT5NP18-D4?

Answer: The 871C-DT5NP18-D4 is made by Allen Bradley - Miscellaneous.


Series information for 871C-DT5NP18-D4

For additional information about 871C-DT5NP18-D4 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 871C-DT5NP18-D4.

Revision Part # Also Known As Availability
871C-DT5NP18-D4/A 871C-DT5NP18-D4 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 871C-DT5NP1B-D4
  • 871C-DT5NPI8-D4
  • 871C-DT5NPIB-D4
  • 871C-DTSNP18-D4
  • 871C-DTSNP1B-D4
  • 871C-DTSNPI8-D4
  • 871C-DTSNPIB-D4
  • 87IC-DT5NP18-D4
  • 87IC-DT5NP1B-D4
  • 87IC-DT5NPI8-D4
  • 87IC-DT5NPIB-D4
  • 87IC-DTSNP18-D4
  • 87IC-DTSNP1B-D4
  • 87IC-DTSNPI8-D4
  • 87IC-DTSNPIB-D4
  • B71C-DT5NP18-D4
  • B71C-DT5NP1B-D4
  • B71C-DT5NPI8-D4
  • B71C-DT5NPIB-D4
  • B71C-DTSNP18-D4
  • B71C-DTSNP1B-D4
  • B71C-DTSNPI8-D4
  • B71C-DTSNPIB-D4
  • B7IC-DT5NP18-D4
  • B7IC-DT5NP1B-D4
  • B7IC-DT5NPI8-D4
  • B7IC-DT5NPIB-D4
  • B7IC-DTSNP18-D4
  • B7IC-DTSNP1B-D4
  • B7IC-DTSNPI8-D4
  • B7IC-DTSNPIB-D4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP