GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 871F-K65N80-N3 |
Series: | 871F |
UPC: | 10611320522232 |
Description:
Part number 871F-K65N80-N3 is a proximity switch. This device was designed and manufactured by Allen Bradley / Rockwell Automation. This device has overload protection, as well as protection against false pulses, transient noise, and short circuits. This switch has a nominal sensing distance of 65 millimeters. The head size of this proximity switch is 83 millimeters. It has an operating temperature that should range from -25 to 70 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This module, the 871F-K65N80-N3, was designed and produced by Allen Bradley / Rockwell Automation as a proximity switch. This module has a mini quick disconnect switch connection type. Aside from that, this Allen Bradley module has a nominal sensing distance of sixty-five (65) millimeters, and the head size of the 871F-K65N80-N3 module is eighty-three (83) millimeters. The 871F-K65N80-N3 is a two (2) wired alternating current (AC) or direct current (DC) proximity sensor type. This Allen Bradley unit has a voltage rating of twenty (20) volts AC/DC to two hundred and fifty (250) volts AC/DC. The leakage current of this module is one-point-seven (1.7) milliamperes at one hundred and twenty (120) volts and two (2.0) milliamperes at two hundred and fifty (250) volts. The peak load current of this proximity switch by Allen Bradley is one hundred (100) milliamperes, whereas the minimum load current is five (5) milliamperes.
This Allen Bradley unit can withstand a shock rating of up to thirty (30) G for a duration of eleven (11) milliseconds. In addition to that, this switch includes protection against false pulses, transient noise, short circuits, and overloads. The switch also has either the two (2) conductor, two (2) terminals, or the three (3) pin connection. Furthermore, this Allen Bradley module has the certifications of cULus Listed and CE Marked for all acceptable directives. When operating this device, the ambient temperature should range from negative twenty-five (-25) to seventy (70) degrees Celsius, or the equivalent temperature range of negative thirteen (-13) to one hundred and fifty-eight (158) degrees Fahrenheit.
Question: Does Automation Stop offer repairs on the 871F-K65N80-N3?
Answer: Yes. We offer repairs for the 871F-K65N80-N3 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 871F-K65N80-N3?
Answer: If you buy the 871F-K65N80-N3 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 871F-K65N80-N3 online?
Answer: Yes. Automation Stop sells the 871F-K65N80-N3 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 871F-K65N80-N3?
Answer: The 871F-K65N80-N3 is made by Allen Bradley - Miscellaneous.
Question: What voltage is included with the Allen Bradley - Miscellaneous 871F-K65N80-N3?
Answer: The 871F-K65N80-N3 by Allen Bradley - Miscellaneous has a voltage of 40-250.
For additional information about 871F-K65N80-N3 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 871F-K65N80-N3.
Revision Part # | Also Known As | Availability |
---|---|---|
871F-K65N80-N3/A | 871F-K65N80-N3 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.