GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 889D-R4AC-2 |
Series: | 889D |
Description:
Designed and manufactured by the company known as Allen Bradley / Rockwell Automation, part number 889D-R4AC-2 is a cord set from the Bulletin 889D series of products. This is a 4-pin cord set. This cord set comes with a cable that has a size of 22 AWG. This product is suitable for applications that have a maximum operating voltage of 250 volts DC, as well as a maximum current of 4 amperes. This cord set has an operating temperature that should range from -20 degrees Celsius to +105 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 889D-R4AC-2 is a cord set from the Bulletin 889D series of products. This device was designed and produced by Allen Bradley / Rockwell Automation. It is used to secure the connections between limit switches, proximity sensors, photoelectric sensors, and other field equipment. This assembly comes with a cord/cable with a size of 22 AWG. It is a 4-pin DC cord set with the female connector at one end of the cable. On the other end of the cable is a DC micro M12 connector. This connector is fitted on the cable at a right angle. The female connector has a width of 1.72 inches and a height of 1.78 inches. The cable in this cord set has a yellow jacket. This jacket is oil resistive and made up of Polyvinyl chloride (PVC). The cable of this assembly can withstand a maximum direct current voltage of 300 volts DC. The cable is color-coded according to IEC standards, and its length is around 6.56 feet (2 meters). This assembly is suitable for applications with a maximum operating voltage of 250 volts direct current (DC) and a maximum operating current of 4 amperes. This cord set also has a rotating coupling nut for increased vibration resistance. The coupling nut is made of zinc that has been epoxy-coated. The contacts of this assembly are made of gold over nickel-plated brass. This product is UL recognized and has also been certified by CSA. It is an IP69K/NEMA 6P rated assembly. This assembly is best suited to operate within temperatures ranging from -20 degrees Celsius to +105 degrees Celsius (-4 degrees Fahrenheit to +221 degrees Fahrenheit).
Question: Does Automation Stop offer repairs on the 889D-R4AC-2?
Answer: Yes. We offer repairs for the 889D-R4AC-2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 889D-R4AC-2?
Answer: If you buy the 889D-R4AC-2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 889D-R4AC-2 online?
Answer: Yes. Automation Stop sells the 889D-R4AC-2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 889D-R4AC-2?
Answer: The 889D-R4AC-2 is made by Allen Bradley - Miscellaneous.
For additional information about 889D-R4AC-2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 889D-R4AC-2.
Revision Part # | Also Known As | Availability |
---|---|---|
889D-R4AC-2/A | 889D-R4AC-2 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.