GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1202-C30 |
Series: | Allen Bradley 1202 |
UPC: | 10662468286173 |
Description:
Part number 1202-C30 is a male-to-male cable by Allen-Bradley. It is a SCANport that connects the human interface module to the drive. Allen-Bradley modules are typically connected with compatible Allen-Bradley cables. There are a number of male to male and male to female cables present in the series. Male to female cables are commonly used as extension cables. This particular cable is three (3) meters in length. Less than ten (10) meters of cable should be used between a SCANport module and the various compatible peripherals.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
1202-C30 is a SCANport cable by Allen-Bradley. It is a male-to-male cable that is used with different Allen-Bradley modules such as the 1203-GD1 module, the 1336-GM1 board, and the 1203-GK1 module. It acts as a SCANport that plays its part in connecting the human-machine interface (HMI) directly to the drive. All such modules require compatible cables for proper connection and working. Allen-Bradley has introduced a number of cables for this purpose. The series contains male to male cables and male to female cables as a part of their product line. The major difference among different models of cables lies in the length of the cable. The length of 1202-C30 cable is three (3) meters. Less than ten (10) meters of cable is to be used between SCANport module and all corresponding peripherals for best performance. It should be noted that these cables are to be kept at a distance from high power cables at all times. If they are close to high power cables, it may introduce noise in the connection. This noise may affect the overall performance of the system and the desired output cannot be achieved. These cables should be installed using proper guidelines and instructions. These cables are designed in such a way that they get locked when the connection is established. For the removal process, instructions have to be followed. The cable has to be pushed in slightly and then pulled out. These cables are manufactured using the best practices and quality material. Therefore, they are widely used in the industry.
Question: Does Automation Stop offer repairs on the 1202-C30?
Answer: Yes. We offer repairs for the 1202-C30 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1202-C30?
Answer: If you buy the 1202-C30 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1202-C30 online?
Answer: Yes. Automation Stop sells the 1202-C30 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1202-C30?
Answer: The 1202-C30 is made by Allen Bradley - Miscellaneous.
Question: What voltage is included with the Allen Bradley - Miscellaneous 1202-C30?
Answer: The 1202-C30 has a voltage of 28.
For additional information about 1202-C30 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1202-C30.
Revision Part # | Also Known As | Availability |
---|---|---|
1202-C30/A | 1202-C30 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.