GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1440-VDRS06-00RH |
Series: | Allen Bradley 1440 |
Description:
The Allen-Bradley 1440-VDRS06-00RH is an XM-160 direct vibration module. This device is comprised of 4 virtual switches, a single on-board relay, and 1 tachometer channel.This device has a voltage rating of 24 volts direct current (DC) at 0.19 amperes. It also has a heat dissipation rating of 4.6 watts at 24 volts DC. The operating temperature of this module is -20 to 65 degrees Celsius, while the maximum temperature of the surrounding air should be 65 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1440-VDRS06-00RH is an XM-160 direct vibration module. This device is ideal for detecting vibration in rotating equipment's axes, enclosure, or pedestal. When linked to an XM 441 expansion relay module, this direct vibration module is comprised of four (4) virtual switches or four (4) extra switches. This device also includes a single on-board relay. This direct vibration module is also comprised of one (1) tachometer channel. This channel receives an input from most speed monitoring detectors. The tachometer can detect speeds between one (1) and one-point-two (1.2) million revolutions per minute (rpm), with pulse rates between one (1) and fifty thousand (50,000) occurrences per rotation. This device also has two (2) channels for connecting common vibration. This sensory channel has a voltage output signal of twenty-four (24) volts direct current (DC) with a 0.19-ampere range. This device also offers signal processing, which can provide FFT processing and two (2) integration levels, with up to thirty (30) parameters being measured. This product is UL listed. The 1440-VDRS06-00RH includes two (2) isolated data outputs of four (4) to twenty (20) milliamperes (mA). It is a device that, in response to the movement of a control signal, establishes an electrical connection between two (2) or more places. The electromechanical relay, or EMR, is the most common and extensively used form of electrical relay. It is an IEPE accelerometer, which combines mechanical sensing devices of small size to measure acceleration, typically built on silicon, with microelectronic circuits. This Allen-Bradley product has an operational temperature that ranges from -20 to 65 degrees Celsius, or the equivalent of -4 to 149 degrees Fahrenheit.
Question: Does Automation Stop offer repairs on the 1440-VDRS06-00RH?
Answer: Yes. We offer repairs for the 1440-VDRS06-00RH and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1440-VDRS06-00RH?
Answer: If you buy the 1440-VDRS06-00RH through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1440-VDRS06-00RH online?
Answer: Yes. Automation Stop sells the 1440-VDRS06-00RH online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1440-VDRS06-00RH?
Answer: The 1440-VDRS06-00RH is made by Allen Bradley - Miscellaneous.
For additional information about 1440-VDRS06-00RH check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1440-VDRS06-00RH.
Revision Part # | Also Known As | Availability |
---|---|---|
1440-VDRS06-00RH/A | 1440-VDRS06-00RH Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.