GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1492-ACABLE010TB |
Series: | Allen Bradley 1492 |
Description:
Bulletin 1492 refers to an Allen Bradley product that is made by Rockwell Automation. It's a pre-wired cable that comes as an add-on for the 1756-IF8. The voltage supply of this wire is single-ended. It's a unit for analog input. It measures 1 meter in length. 662072833001 is another name for Allen Bradley's product. It has a D shell connector and a ring lug at the I/O module end of the cable.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Bulletin 1492 refers to an Allen Bradley product that is made by Rockwell Automation. It's a pre-wired cable that comes as an add-on for the 1756-IF8. The voltage supply of this wire is single ended. It's a unit for analog input. It measures 1 meter in length. 662072833001 is another name for Allen Bradley's product. It's very beneficial for analog signaling systems. It is acceptable for use with input board PLCs but not with output card PLCs. This product is used to boost device building performance and reduce design and engineering time. It also cuts down on both installation time and failures. They're made to cut down on command cabling in a panel. If used with a conventional IFM, pre-wired links eliminate point-to-point wiring between Allen-Bradley programmable controller I/O modules and single terminal blocks. A detachable terminal blocker or wiring arm from the PLC is on either end of the pre-wired wires, and a D-shell connection with a slide-locking feature connects to the IFM on the other side. Most of these cables use twisted pairs, and they invariably have shielding to protect low-level analog signals from disturbance. Most of these wires have a supplied drainage wire with a ring lug at the I/O module end of the cable for simpler anchoring of the cable covering to the chassis. They're put through rigorous reliability testing to ensure a perfect connection every time. The analog pre-wired cables are offered in four basic lengths to suit a variety of applications including 0.5m, 1.0m, 2.5m, and 5.0 m lengths.
Question: Does Automation Stop offer repairs on the 1492-ACABLE010TB?
Answer: Yes. We offer repairs for the 1492-ACABLE010TB and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1492-ACABLE010TB?
Answer: If you buy the 1492-ACABLE010TB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1492-ACABLE010TB online?
Answer: Yes. Automation Stop sells the 1492-ACABLE010TB online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1492-ACABLE010TB?
Answer: The 1492-ACABLE010TB is made by Allen Bradley - Miscellaneous.
For additional information about 1492-ACABLE010TB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1492-ACABLE010TB.
Revision Part # | Also Known As | Availability |
---|---|---|
1492-ACABLE010TB/A | 1492-ACABLE010TB Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.