GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1492-CB1G100 |
Series: | Allen Bradley 1492 |
Description:
Allen Bradley's 1492-CB1G100 is a series C miniature circuit breaker having one pole. It is suitable for inductive loads with a full load current of 10 amperes. Its tripping current is 6 to 10 times of full load current. It is designed for maximum rated power of 2 horsepower at a rated voltage of 277 Volts AC /1 phase. It has 1960 Volts AC dielectric strength, a short circuit rating of 5 kA at 277 Volts AC and an overload rating of 0 at 277 Volts AC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
1492-CB1G100 belongs to Allen Bradley's bulletin 1492-CB that contains overcurrent protectors having thermal-magnetic type and meet the requirements of UL 1077/ CSA 22.2 No. 235, IEC/EN 60934. It is also known as a miniature circuit breaker. This device is developed for the protection of a vast variety of products, which includes solenoids, testing equipment, I/O Points of controllers, relays and contactor coils, computers, transformer, power supplies, automotive systems, medical supplies, and control instrumentation.
1492-CB1G100 may be used for direct control of manual motor controllers when motors are connected across the line. Further, it is also intended to operate as a motor disconnect and may be sealed in the OFF position when it is utilized with the locking device kit. Upon overcurrent in controllers, it has an overload trip and instantaneous magnetic trip feature devised to trip open the main contacts. These trips are non-replaceable and fixed thermal (bimetal type). That's why it is appropriate to provide the motor with overload protection. It has limited DC ratings.
1492-CB1G100 is one pole, type C miniature circuit breaker. It is mainly used for inductive loads that can have a continuous current (full load current) of 10 amperes. Its tripping current is 6 to 10 times the full load current (10 amperes). It has a G trip curve. Its maximum operating voltage and power are 277 Volts AC (1 phase) and 2 horsepower. It has the dielectric strength of 1960 Volts AC. Without a series fuse, it offers a 5 KA short circuit rating at 277 Volts AC. For general use, it offers an overload rating of 0 @ 277 Volts Ac.
Question: Does Automation Stop offer repairs on the 1492-CB1G100?
Answer: Yes. We offer repairs for the 1492-CB1G100 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1492-CB1G100?
Answer: If you buy the 1492-CB1G100 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1492-CB1G100 online?
Answer: Yes. Automation Stop sells the 1492-CB1G100 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1492-CB1G100?
Answer: The 1492-CB1G100 is made by Allen Bradley - Miscellaneous.
Question: What voltage does the 1492-CB1G100 have?
Answer: The 1492-CB1G100 includes a voltage of 277.
Question: What amperage does the Allen Bradley - Miscellaneous 1492-CB1G100 have?
Answer: The 1492-CB1G100 by Allen Bradley - Miscellaneous has a amperage of 10.
For additional information about 1492-CB1G100 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1492-CB1G100.
Revision Part # | Also Known As | Availability |
---|---|---|
1492-CB1G100/A | 1492-CB1G100 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.