GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1492-IFM40F-FS120-2 |
Series: | Allen Bradley 1492 |
UPC: | 10662072685416 |
Description:
1492-IFM40F-FS120-2 is a digital interface module by Allen Bradley. It is a non-removable terminal block. Its cable connector has 40 pins. For status indication, it has no LEDs. It is an isolated IFM and has fuse clips of size 5 x 20 millimeters. It comes with 2 field-side wiring terminals for each I/O connection. Its terminals are divided into 16 isolated groups to allow the use of a different power source for each I/O devices group.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Digital IFM, 1492-IFM40F-FS120-2, similar to the terminal blocks, has 40-pin cable connectors (commonly 16 to 32 PLC I/O points). It offers two field-side wiring terminals per I/O point. It is consistent with both the pre-wired cables as well as the IFM-ready cables.
1492-IFM40F-FS120-2 is an isolated IFM whose terminals are isolated into 16 groups. This grouping enables each group of I/O devices to use a distinct power source. This extra terminal module is useful in applications where I/O devices are terminated inside the same panel as the I/O modules, avoiding the requirement for several additional terminal blocks. It features a 40-pin keyed cable connector that comes with locking tabs for simple and easy installation. And, also ensures a secure connection with IFM pre-wired / ready cables. For quick installation, it offers standard DIN #3 rail mounting. To accommodate more connections within a minimal space, wiring terminals on the field side of the module are highly dense.
Its operating voltage ranges from 85 volts AC/DC to 132 volts AC/DC. It allows a maximum of 2 amperes of current per circuit. It can allow a maximum current of 12 amperes per module. It has a width of 7.09 inches, a height of 3.27 inches, and a depth of 2.78 inches. It comes with fuse holders having dimensions of 5 x 20 millimeters. For outputs ( in every 16 groups), it has blown fuse LED indicators. These LEDs operate on 120 Volts AC/ DC and draw up to 2.5 milliamperes. It is suitable for bulletin 1746 SLC 500, Bulletin 1771, Bulletin 1756 ControlLogix, Bulletin 1769 Compact I/O for CompactLogix & MicroLogix 1500 , and Bulletin 1794 of Allen Bradley.
Question: Does Automation Stop offer repairs on the 1492-IFM40F-FS120-2?
Answer: Yes. We offer repairs for the 1492-IFM40F-FS120-2 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1492-IFM40F-FS120-2?
Answer: If you buy the 1492-IFM40F-FS120-2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1492-IFM40F-FS120-2 online?
Answer: Yes. Automation Stop sells the 1492-IFM40F-FS120-2 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1492-IFM40F-FS120-2?
Answer: The 1492-IFM40F-FS120-2 is made by Allen Bradley - Miscellaneous.
Question: What voltage does the Allen Bradley - Miscellaneous 1492-IFM40F-FS120-2 have?
Answer: The Allen Bradley - Miscellaneous 1492-IFM40F-FS120-2 has a voltage of 120.
For additional information about 1492-IFM40F-FS120-2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1492-IFM40F-FS120-2.
Revision Part # | Also Known As | Availability |
---|---|---|
1492-IFM40F-FS120-2/A | 1492-IFM40F-FS120-2 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.