GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

2707-L40P2

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 2707-L40P2
Series: Microview 2707
UPC: 10662468186039

Description:

Part number 2707-L40P2 is a DTAM operator interface terminal that was designed and manufactured by Allen Bradley / Rockwell Automation. This terminal belongs to the Bulletin 2707 series of products. This terminal is equipped with an LCD display, as well as a keypad. The required input power of this terminal is 85 volts AC to 265 volts AC at a frequency range of 47 to 440 hertz. This terminal has an operating temperature range of 0 to 45 degrees Celsius.


Key Features:

  • contains 40k memory
  • comes discontinued/obsolete

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Original Packaging

$2,394.00

Available: 3

What is Original Packaging

Your order will ship by . Need it faster?

Refurbished

$665.00

Available: 13

What is Refurbished

Your order will ship by . Need it faster?

Looking for a 2707-L40P2? We can help!

Request a Quote

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 2707-L40P2 is a DTAM Plus operator interface terminal. It belongs to the Bulletin 2707 series of products. This model has an LCD (liquid crystal display) that can display 4 lines of 20 characters each. It has a contrast ratio of 10:1. Additionally, this display has four (4) settings when it comes to the contrast and brightness. This display has a display size that measures 1.0 inch x 3.0 inches, or 25.3 millimeters x 76.0 millimeters (height x width). The character size for this display measures 0.19 inches x 0.12 inches, or 4.75 millimeters x 2.95 millimeters. This terminal also has a memory capacity of 40K. The input voltage range required to operate this device is 85 volts AC to 265 volts AC at the input frequency range of 47 to 440 hertz. The DC voltage range of this DTAM operator interface terminal is 110 volts DC to 330 volts DC. In addition to establishing communication, this operator interface terminal is equipped with RS-232 and RS-485 communication ports. Additionally, this module has RS-232C printer ports.

Part number 2707-L40P2 is equipped with a keypad that has 25 fully functional keys on its top front. This keypad is embossed with a sealed membrane and has a stainless-steel dome. This keypad has an operational life of one million (1,000,000) cycles. As far as the power supply is concerned, it gets its main power source from the P2 power supply. This terminal is equipped with a real-time clock. The ambient operating temperature of this terminal is 0 to 45 degrees Celsius, while the ambient storage temperature ranges from -20 to +85 degrees Celsius.

Technical Specifications

Region of Manufacture* United States
Type Operator Interface Panel

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2707-L40P2?

Answer: Yes. We offer repairs for the 2707-L40P2 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 2707-L40P2?

Answer: If you buy the 2707-L40P2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2707-L40P2 online?

Answer: Yes. Automation Stop sells the 2707-L40P2 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2707-L40P2?

Answer: The 2707-L40P2 is made by Allen Bradley - Miscellaneous.


Question: What type of product is the 2707-L40P2?

Answer: The 2707-L40P2 is part of the Microview 2707 series.


Question: What Region of Manufacture* is included with the Rockwell Automation 2707-L40P2?

Answer: The Rockwell Automation 2707-L40P2 has a United States Region of Manufacture*.


Series information for 2707-L40P2

For additional information about 2707-L40P2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2707-L40P2.

Revision Part # Also Known As Availability
2707-L40P2/A 2707-L40P2 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 2707-L4OP2
  • 27O7-L40P2
  • 27O7-L4OP2

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP