700-HK36A1

The 700-HK36A1, which was designed and manufactured by Allen Bradley / Rockwell Automation, is a general-purpose slim line relay whose contact arrangement is a single form C, meaning that it has a single pole and features double-throw contacts that consists of a terminal for a normally open (NO) contact, another terminal for a normally closed (NC) contact, and a final terminal for a common. In total, this device has three terminals. This arrangement serves the device during actuation by transferring a circuit. The material used for the contact is Silver nickel (AgNi) or a combination of Silver nickel (AgNi) and Gold (Au). This device has a voltage supply rated at 120 volts at a frequency of 50/60 hertz.

The National Electric Manufactures Association (NEMA) ratings for the contact is designated as B300, meaning the slim line relay can be exposed to a continuous thermal test current of 5 amperes with a make power of 3600 volts-amperes and a break power of 360 volts-amperes. The switching ability of this slim line relay is indicated as a minimum of 10 volts supply in alternating current and direct current phases (AC/DC) while the flow of current ranges from 10 to 50 milliamperes. This device has a maximum voltage of 30 volts with a current range of 5 to 10 amperes.

The Allen Bradley 700-HK36A1 slim line relay features a retainer clip which comes with the socket. It enhances low switching capacity and may be equipped with an optional pilot light. It has an estimated electrical service life cycle of 100,000 minutes. The dielectric voltage that can be withstood for pole-to-pole connection is 2000 volts AC, while for contact to coil connection, the dielectric withstand voltage is 4000 volts AC.