GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 700-HN125 |
Series: | Allen Bradley 700 |
Description:
Part number 700-HN125 is an eight (8)-pin octal socket that is a screw type socket. This product was designed and manufactured by the company known as Allen Bradley. This socket has a tube base and can be mounted as a DIN rail or panel type. The enclosure of this product is that of an open type. The physical dimensions of the Allen Bradley 700-HN125 are 54.9 mm x 24.6 mm x 40.1 mm, or 2.2 inches x 0.97 inches x 1.6 inches.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 700-HN125 is a part of the Bulletin 700 series of products. This device, which was designed and manufactured by Allen Bradley / Rockwell Automation, is a general purpose relay. The tube based screw socket terminal has a panel or DIN railing type mounting. This replay has an open-style construction. This socket has an 8-pin limit for the use of replays. No retainer clip is required. There are 10 sockets in one package. These sockets have a screw terminal and a tube based socket. These factors extended its ability to be attached to various devices and components. The socket color for this device is typically gray. The output current is ten (10) amperes, and the supply current is 300 volts of AC (alternating current) supply. The wire size of the socket is 2 x 2.5 mm² and a single wire can be up to 12 AWG (American Wire Guage). A double wire is 2 x 2.5 mm², which is the equivalent of #2-14 AWG to #2-20 AWG. The strip length is measured as 9 mm, or 3/8 inch, with the torque being 0.8 Nm, or 7 lb-in. The dimensions of this socket are roughly 54.9 mm x 24.6 mm x 40.1 mm, or the equivalent of 2.2 inches x 0.97 inches x 1.6 inches. The Bulletin 700 relay can be used together with timing or surge suppressor modules by plugging it to 700-HN125 eight (8)-pin socket. The certifications for this socket include CCC, CE, CSA, CUL, KC, and UL listed and certified.
Question: Does Automation Stop offer repairs on the 700-HN125?
Answer: Yes. We offer repairs for the 700-HN125 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 700-HN125?
Answer: If you buy the 700-HN125 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 700-HN125 online?
Answer: Yes. Automation Stop sells the 700-HN125 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 700-HN125?
Answer: The 700-HN125 is made by Allen Bradley - Miscellaneous.
For additional information about 700-HN125 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 700-HN125.
Revision Part # | Also Known As | Availability |
---|---|---|
700-HN125/A | 700-HN125 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.