GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 700-NA40 |
Series: | Allen Bradley 700 |
Description:
The 700-NA40 industrial relays are crafted by Allen-Bradley, and it has a thermal current of 10 amperes along with an insulation voltage of 300 amperes. The contact rating of this Allen-Bradley module is 10 amperes at 300 volts AC. The NEMA alternating current contact rating for this Allen-Bradley module is A300. Furthermore, this unit has four (4) poles, and the material that is utilized on the contact of this unit is silver.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 700-NA40 industrial relays are designed and manufactured by Allen-Bradley. This device's electrical ratings are as follows: 10 amperes of rated thermal current, 300 volts of rated insulation voltage, and the contact rating is at 10 amperes at 300 volts alternating current. The National Electrical Manufacturers Association alternating current contact rating for this Allen-Bradley module is NEMA A300. This module by Allen-Bradley contains four (4) poles. The contact material used on this unit is silver. The mounting that this module supports is panel mounting and strip mounting. Moreover, this Allen-Bradley unit's ideal range of temperature that it operates outside the enclosure ranges from -20 degrees Celsius to 40 degrees Celsius, or the equivalent of –4 to 104 degrees Fahrenheit, while its ideal storage temperature is -40 degrees Celsius to 60 degrees Celsius, or -40 to 140 degrees Fahrenheit. The device also sees an additional 25 degrees Celsius rise when it operates inside the enclosure. Moreover, this Allen-Bradley unit is compliant with underwriter laboratories 508 and Canadian standard association C22.2. It is also cULus listed, which renders it compliant with both Canadian and United States' requirements. Furthermore, the maximum operating pickup time of this Allen-Bradley unit is 14 milliseconds, while the drop out operating time is rated at 13 milliseconds. The physical dimensions of this device measure 185 millimeters by 94 millimeters by 238 millimeters, or the equivalent of 7.3 inches by 3.7 inches by 9.4 inches. The device's approximate weight that it comes with is around 0.68 kilograms (kg), or the equivalent of roughly 1.5 pounds (lbs).
Question: Does Automation Stop offer repairs on the 700-NA40?
Answer: Yes. We offer repairs for the 700-NA40 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 700-NA40?
Answer: If you buy the 700-NA40 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 700-NA40 online?
Answer: Yes. Automation Stop sells the 700-NA40 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 700-NA40?
Answer: The 700-NA40 is made by Allen Bradley - Miscellaneous.
For additional information about 700-NA40 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 700-NA40.
Revision Part # | Also Known As | Availability |
---|---|---|
700-NA40/A | 700-NA40 Ser A, Series A, Rev A | Request a Quote |
700-NA40/B | 700-NA40 Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.