GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 700-P200A1 |
Series: | Allen Bradley 700 |
Description:
The 700-P200A1 heavy-duty industrial relay was manufactured by Allen-Bradley / Rockwell Automation. This relay is a 600-volt industrial relay that belongs to the Bulletin 700 series of products. This device has two (2) normally open (NO) contacts with a 10-ampere contact capacity and a double-break and bifurcated configuration. This relay is equipped with finger-safe technology. This device can be mounted via a DIN rail mount. The coil of this device is rated at 110 volts at 50 hertz and 115 to 120 volts at 60 hertz.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 700-P200A1, which is a product of Allen Bradley / Rockwell Automation, is a NEMA heavy-duty industrial relay. This device belongs to the Bulletin 700 series of relays, which employ a standard contact cartridge with a double braking system and split design. The contact current rating for this device is 10 amperes. The bifurcation offers good contact reliability and reduced contact bouncing, though the double-breaking contact plan helps the relay break DC circuits by reducing contact soldering. This relay has a maximum AC/DC voltage of 600 volts and comes equipped with finger-safe technology.
Bulletin 700 heavy-duty relays come with four (4) different kinds of contact cartridges to assist the operator in fulfilling their individual switching needs. A delay time, latching attaches, overlap, and logical reeds contact are all examples of logic reed contacts that may all be integrated into no more than one relay to provide the development of a custom-fit application that can aid boost versatility. Furthermore, in addition to its solid reputation, the Bulletin 700 series of relay modules is known for its quality, reliability, and variety of contacting cartridges. Allen-Bradley is the preferred brand for relays due to its rugged design and extended life.
For increased versatility, it is possible to switch between 200 milliamperes and 35 amperes in limited energy circuits by using Bulletin 700 heavy-duty relays. All of the contacts are readily switchable from a normally open (NO) to a normally closed (NC) configuration. NEMA enclosures and time-delayed connections are just some of the many accessories available to suit a wide variety of needs.
Question: Does Automation Stop offer repairs on the 700-P200A1?
Answer: Yes. We offer repairs for the 700-P200A1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 700-P200A1?
Answer: If you buy the 700-P200A1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 700-P200A1 online?
Answer: Yes. Automation Stop sells the 700-P200A1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 700-P200A1?
Answer: The 700-P200A1 is made by Allen Bradley - Miscellaneous.
Question: What voltage is included with the 700-P200A1?
Answer: The Allen Bradley - Miscellaneous 700-P200A1 includes a voltage of 600.
For additional information about 700-P200A1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 700-P200A1.
Revision Part # | Also Known As | Availability |
---|---|---|
700-P200A1/A | 700-P200A1 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.