GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 700-PSRA1 |
Series: | Allen Bradley 700 |
Description:
The Allen Bradley 700-PSRA1 is a Series A, 600 V AC, solid state timer. The timer operates in off-delay mode with a 0.4 to 8 second timing range. It has a line voltage rating specified at 110 to 120 V AC at 50 to 60 Hz and 1 normally open (N.O) contact. Its contact ratings at 120 to 600 VAC are 3600 VA (make) and 360 VA (break) for a NEMA B600 enclosure. The timer is UL listed and weighs approximately 0.43 kg.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 700-PSRA1 by Allen Bradley is a Series A solid state timer. It has a rated voltage of 600 V AC maximum. The off- mode delay timer has a timing range of 0.4 to 8 seconds. It has a line voltage rating of 110 to 120 V AC at a frequency of 50 to 60 Hz. The timer has one normally open (NO) contact. The timer’s output contacts ratings for an enclosure type NEMA B600 include make and break ratings of 3600 VA and 360 VA, respectively, at voltages of 120 to 600 VAC, make and break ratings of 30 A and 360 VA, respectively, at voltages of 72 to 120 VAC, and make and break ratings of 30 A and 5 A, respectively, at voltages of 5 to 72 VAC. Similarly, when using a NEMA P300 enclosure type, the make/break ratings of the timer contacts are 138 VA, 138 VA, and 3 A for 125 to 300 V DC, 46 to 125 V DC, and 5 to 46 V DC, respectively.
To prevent damage to the timer, it is advised to use isolated initiate contact (S1-S2). The timer has screw type electrical contacts for external connection. The timer is designed to be used with Allen Bradley Bulletin 700 relays. It can be mounted directly on top of a 4-pole Bulletin 700, Bulletin 700-P, or Bulletin 700-PK relay, or a 2-pole Bulletin 700-PH relay. The timer is UL listed for all applicable derivatives. The timer has a compact and space saving design with a shipping weight of nearly 0.43 kg.
Question: Does Automation Stop offer repairs on the 700-PSRA1?
Answer: Yes. We offer repairs for the 700-PSRA1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 700-PSRA1?
Answer: If you buy the 700-PSRA1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 700-PSRA1 online?
Answer: Yes. Automation Stop sells the 700-PSRA1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 700-PSRA1?
Answer: The 700-PSRA1 is made by Allen Bradley - Miscellaneous.
Question: What voltage is included with the Allen Bradley - Miscellaneous 700-PSRA1?
Answer: The Allen Bradley - Miscellaneous 700-PSRA1 includes a voltage of 600.
For additional information about 700-PSRA1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 700-PSRA1.
Revision Part # | Also Known As | Availability |
---|---|---|
700-PSRA1/A | 700-PSRA1 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.