GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800T-FXD4 |
Series: | Allen Bradley 800T |
Description:
Item number 800T-FXD4 is a two-position button that was designed and produced by Allen Bradley / Rockwell Automation. It has a mushroom head that measures 30 millimeters. This device has a metal 4/13 enclosure but does not have finger safeguards. This device also does not have a cap or a standard contact block. It operates within range of 24 to 600 volts AC/DC. The electrical lifecycle for the contacts is a minimum of 1,000,000 cycles, with a minimum mechanical lifecycle of 250,000 cycles.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 800T-FXD4 is a push button device, manufactured by Allen Bradley, as part of the 800T family of buttons. It is a 2-position button with a mushroom head with a diameter that measures 30 millimeters, operating via push-pull activity. It is a non-illuminated device, manufactured using metal materials in a type 4/13 enclosure. It does not possess finger safeguards or cap. The contact block is standard type and operates in the input range of 24 to 600 volts AC/DC. The device has a maximum 10 amperes thermal continuous current in AC applications and 2.5 amperes with DC. The contact's expected electrical life cycle is a minimum of one million (1,000,000) cycles when used at maximal rated load. The button requires a maximum of 8 pounds operating force for push or pull operation. It has a mechanical design lifecycle of minimum of two hundred and fifty thousand (250,000) operations.
The device contact blocks operate under the "normally closed late break" contact principle. This principle concerns the contacts change state when the operator switches the button. Moving from the OUT to IN point, the operator's mechanical activity appears first to the contacts change state. At the reverse operation when button is switched from IN to OUT, the contacts change state before the mechanical movement is finished. This button device conforms to EN ISO 13850, IEC 60947-5-5 emergency stop standards. For the best performance, it is recommended during installation an additional jumbo plate or large legend plate to be used, if there are no place limitations for this.
Question: Does Automation Stop offer repairs on the 800T-FXD4?
Answer: Yes. We offer repairs for the 800T-FXD4 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800T-FXD4?
Answer: If you buy the 800T-FXD4 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800T-FXD4 online?
Answer: Yes. Automation Stop sells the 800T-FXD4 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800T-FXD4?
Answer: The 800T-FXD4 is made by Allen Bradley - Miscellaneous.
For additional information about 800T-FXD4 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800T-FXD4.
Revision Part # | Also Known As | Availability |
---|---|---|
800T-FXD4/A | 800T-FXD4 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.