GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800T-N376G |
Series: | Allen Bradley 800T |
Description:
The 800T-N376G from Allen Bradley is a Bulletin 800T series LED replacement light. The color of this LED bulb is green, and it is from series A. It features a bayonet base and has a recommended voltage of 12 to 130 volts AC/DC. This is a standard 30 mm push button lamp replacement with lighted pushbuttons, selection switches, and pilot lights. The 800T-N376G features a split S crucible and is KC standard.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
A lamp-type LED, the 800T-N376G is a component that is part of the 800T and 800H series of products. A green LED replacement light with a voltage rating of 3 volts, this product is simple to install. In this dual input series product diode type, circuit isolation is achieved by the use of two (2) diodes that are in opposite phases. In certain cases, there are restrictions. This device is not suggested to be used with solid-state outputs. The LED lighting option is not accessible with diode style dual input, and the glass lens is only available on the 800T pilot light.
The 800T-N376G does have a span of 10 hertz to 2 kilohertz (frequency band), a maximum displacement of 0.06 inches, or 1.52 mm, peak-to-peak, and a maximum acceleration of 10 G. It has Type 1/4/12/13 protection for 800T products and types 1/4/4X/12/13 protection for 800H products, as well as ingress protection grade IP66/65. It is also available in several colors. This product has a mechanical design life cycle of two hundred thousand (200,000) actions at the minimum. This Allen Bradley product has an operating temperature that should remain within a range of -40 to +131 degrees Fahrenheit, or -40 to +55 degrees Celsius, as well as a storage temperature that should remain within a range of -40 to +185 degrees Fahrenheit, or -40 to +85 degrees Celsius. With a terminal screw strength of 6 to 8 lb-in, this product has a wire size of 18 to 14 AWG, as well as a maximum wire thickness limit of 18 to 10 AWG whenever utilized in high-duty activities.
Question: Does Automation Stop offer repairs on the 800T-N376G?
Answer: Yes. We offer repairs for the 800T-N376G and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800T-N376G?
Answer: If you buy the 800T-N376G through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800T-N376G online?
Answer: Yes. Automation Stop sells the 800T-N376G online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800T-N376G?
Answer: The 800T-N376G is made by Allen Bradley - Miscellaneous.
For additional information about 800T-N376G check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800T-N376G.
Revision Part # | Also Known As | Availability |
---|---|---|
800T-N376G/A | 800T-N376G Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.