GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800T-T2H3 |
Series: | Allen Bradley 800T |
Description:
Allen-Bradley designed and produced the 800T-T2H3 30-millimeter-long Toggle Switch. The 800T-T2H3 switching kit has no contact blocks position 1 to 4 and no terminal guards. This device comes in a package. This two-way toggle switch has a NEMA rating of 4 and 13. It also has a current rating of 10 amperes. This module has been approved by the CSA and the UL.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 800T-T2H3 is a thirty (30)-millimeter toggle switch manufactured by Allen-Bradley, and it is a two (2)-way toggle switch that is part of the 800T series. It has a maximum thermal constant power of ten (10) amperes rated current flows and a minimal low energy switching load of seventeen (17) volts DC (direct current) and five (5) milliamperes at its lowest power. The number of electrical design lifecycles is one million (24 volts DC, 25 milliamperes). Die-cast category aluminum, stainless steel, glass, as well as thermoplastic polyester resin construction are among the materials available for thirty (30)-millimeter assembled stations.
The vibration rating of the Allen-Bradley 800T-T2H3 is ten (10) G maximum at a frequency range of 10 to 2000 hertz (Hz), with a maximum displacement (peak-to-peak) of 1.52 millimeters. This device is EN/IEC 60529 authorized and has an IP66/65 enclosure rating. It features a 1/4/12/13 degree of protection (for the 800T model), has EN/IEC 60529 accreditation, and has an operational level shock of 1/2 cycle sinewave for a duration of eleven (11) milliseconds at twenty-five (25) G (contact fragility), and also no damage occurs at one hundred (100) G.
The necessary wire gauge and terminal screw torque are 18 and 14 AWG, respectively. Additionally, the maximum weight of a big plastic mushroom is 2 pounds, and the maximum weight of an extended metal mushroom head is 3.95 pounds. Three-point-six (3.6) lb-in is the maximum setting for the switch's selection switch. This toggle switch is available in a variety of sizes.
Question: Does Automation Stop offer repairs on the 800T-T2H3?
Answer: Yes. We offer repairs for the 800T-T2H3 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800T-T2H3?
Answer: If you buy the 800T-T2H3 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800T-T2H3 online?
Answer: Yes. Automation Stop sells the 800T-T2H3 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800T-T2H3?
Answer: The 800T-T2H3 is made by Allen Bradley - Miscellaneous.
For additional information about 800T-T2H3 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800T-T2H3.
Revision Part # | Also Known As | Availability |
---|---|---|
800T-T2H3/A | 800T-T2H3 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.