GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800T-XA4 |
Series: | Allen Bradley 800T |
Description:
Part number 800T-XA4 is a contact block that was designed and manufactured by Allen-Bradley. This device has a maximum thermal DC current flow of 10 amperes, with a minimum low energy switching load of 17 volts DC. The operating temperature range of this Allen-Bradley device is -40 to 55 degrees Celsius, while the storage temperature range is between -40 and 85 degrees Celsius. The relative humidity range of this device is 50 percent to 95 percent at a temperature range of 25 to 60 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 800T-XA4 800T is a contact block from Allen-Bradley. this device belongs to the 800T series of 30 mm pushbuttons manufactured by Allen-Bradley. It is equipped with two normally closed (NC) 30-millimeter size base mount screw terminals. This module comprises hazardous area push buttons and stations, explosion-proof operators, Classes I, II, and III Divisions 1 and 2, Type 7 and 9, and a 0.75-inch 14 NPSM barrel. A nonmetallic material was employed in the construction of this module, which also features base mount capabilities. The maximum thermal DC current flow of this device is 10 amperes, with a minimum low-energy switching load of 17 volts DC. Additionally, this Allen-Bradley device has an electrical design lifespan of one million cycles.
Its vibration tolerance varies from 10 to 2000 hertz, with a maximum displacement of 0.06 inches, or 1.52 millimeters, from peak to peak, and a maximum force of 10 G. This device also has a 1/2 cycle sine wave with a duration of 11 milliseconds and 25 G contact fragility, and it causes no damage at a force of 100 G contact fragility. Aside from that, the degree of protection type is IEC 60529, with an IP rating of 66/65, and the IP rating is IP67 (800H). Operating temperatures for this contract block ranges between -40 and +131 degrees Fahrenheit, or the equivalent of -40 to +55 degrees Celsius. The storage temperature of this device ranges from -40 to +185 degrees Fahrenheit, or -40 to +85 degrees Celsius, and humidity ranges from 50 to 95 percent at 25 to 60 degrees Celsius.
Question: Does Automation Stop offer repairs on the 800T-XA4?
Answer: Yes. We offer repairs for the 800T-XA4 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800T-XA4?
Answer: If you buy the 800T-XA4 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800T-XA4 online?
Answer: Yes. Automation Stop sells the 800T-XA4 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800T-XA4?
Answer: The 800T-XA4 is made by Allen Bradley - Miscellaneous.
For additional information about 800T-XA4 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800T-XA4.
Revision Part # | Also Known As | Availability |
---|---|---|
800T-XA4/A | 800T-XA4 Ser A, Series A, Rev A | Request a Quote |
800T-XA4/B | 800T-XA4 Ser B, Series B, Rev B | Request a Quote |
800T-XA4/C | 800T-XA4 Ser C, Series C, Rev C | Request a Quote |
800T-XA4/D | 800T-XA4 Ser D, Series D, Rev D | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.