GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Drive |
Part Number: | 1326DS-L4D-FL-E1 |
Series: | misc |
Description:
Part number 1326DS-L4D-FL-E1 by Allen Bradley is a DC servo motor. This device is used to operate as an actuator for one of the axes in Allen Bradley's 1386 servo drive system. This servo motor is 4 inches in diameter and rotates at a peak speed of 2500 revolutions per minute. The armature has a 0.023 lb-in inertia. The weight of this device is approximately 7.9 kilograms. Additionally, this servo motor has a 16-pin connection.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen Bradley manufactured the 1326DS-L4D-FL-E1 to serve as a direct current (DC) servo motor. Its function is to serve as an actuator for one of the axes in Allen Bradley's computer aided 1386 servo drive system. The servo is four (4) inches in diameter and rotates at a top speed of 2500 revolutions per minute (rpm). At twenty-five (25) degrees Celsius, the 1326DS-L4D-FL-E1 servo motor features a stall torque of 40.6 pounds inches (lb-in), or 4.6 Newton-meters when operating continuously, along with a stall torque of 101.1 pounds inches (lb-in), or 11.4 Newton-meters at peak operation. At constant torque, the servo motor draws thirteen (13) amperes of current, and 0.02382 lb-in-s², or 0.00269 kg-m², is the inertia of the rotor. The terminals included in the module can handle a maximum voltage of one hundred (100) volts, and the electrical time constant of this servo motor is five (5) milliseconds. At peak torque, the maximum current available is thirty (30) amperes. The motor's rated output current rates is 1.21 kilowatts. This Allen Bradley module can withstand a peak ambient temperature of twenty-five (25) degrees Celsius. The motor has a thermal resistance of 1.1 degrees Celsius per watt (°C/watt) and a thermal time constant of seventy-five (75) minutes, with a class H insulation. The thermal resistance of the motor winding is 0.5 ohms, and the armature inductance is 2.5 millihenry. Its armature temperature reaches a maximum of 155 degrees Celsius. The inertia of the armature is 0.023 lb-in. The weight of this device is approximately 7.9 kilograms.
Question: Does Automation Stop offer repairs on the 1326DS-L4D-FL-E1?
Answer: Yes. We offer repairs for the 1326DS-L4D-FL-E1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1326DS-L4D-FL-E1?
Answer: If you buy the 1326DS-L4D-FL-E1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1326DS-L4D-FL-E1 online?
Answer: Yes. Automation Stop sells the 1326DS-L4D-FL-E1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1326DS-L4D-FL-E1?
Answer: The 1326DS-L4D-FL-E1 is made by Allen Bradley - Miscellaneous.
For additional information about 1326DS-L4D-FL-E1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1326DS-L4D-FL-E1.
Revision Part # | Also Known As | Availability |
---|---|---|
1326DS-L4D-FL-E1/A | 1326DS-L4D-FL-E1 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.