GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1752-L24BBBE |
Series: | misc |
Description:
The Allen Bradley 1752-L24BBBE is a SmartGuard 600 controller. It is a programmable controller featuring 16-digital inputs, 8 digital outputs, and 4 test pulse sources. This controller has an input current rating of 4.5 milliamperes, as well as an input impedance rating of 2.6 kilo ohms. The maximum off-state input voltage of this device is 5 volts DC. This controller has physical dimensions that measure 99.0 mm x 113.0 mm x 131.4 mm. Additionally, the approximate weight of this product is 575 grams, or 1.54 pounds.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1752-L24BBBE is a SmartGuard 600 controller that was designed and manufactured by Allen Bradley / Rockwell Automation. This device has a total of sixteen digital inputs and eight outputs, along with four test pulse sources. Ethernet/IP connection is provided via the 1752-L24BBBE controller. Aside from that, the 16 inputs allow for input circuit diagnosis. The test pulse sources may monitor both internal circuits and external wiring and devices. It also has input on and off delays, in which the operator may select the input duration between 0 and 126 milliseconds to eliminate chattering and noise. It also offers dual-channel mode, which allows the operator to set the channel to dual-mode for the pair of local inputs. This Allen Bradley module features 8 local outputs that allow overcurrent detection and provides overcurrent safety. If overcurrent does occur, the output is shut to safeguard the circuit. The controller may play the role of a DeviceNet safety master or a slave. Moreover, a single controller can operate in all three modes, acting as a safety master and a safety slave, as well as a regular slave too. Additionally, this controller provides explicit messaging access to controller status information. To transmit explicit messages, the user program can configure explicit messaging and the messages would be sent through DeviceNet and Ethernet/IP. Aside from that, to program the SmartGuard 1752-L24BBBE controller on the DeviceNet network, a USB can be utilized by operators. However, SmartGuard has limited pass-through capabilities from USB to DeviceNet to program and configure it.
Question: Does Automation Stop offer repairs on the 1752-L24BBBE?
Answer: Yes. We offer repairs for the 1752-L24BBBE and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1752-L24BBBE?
Answer: If you buy the 1752-L24BBBE through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1752-L24BBBE online?
Answer: Yes. Automation Stop sells the 1752-L24BBBE online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1752-L24BBBE?
Answer: The 1752-L24BBBE is made by Allen Bradley - Miscellaneous.
For additional information about 1752-L24BBBE check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1752-L24BBBE.
Revision Part # | Also Known As | Availability |
---|---|---|
1752-L24BBBE/A | 1752-L24BBBE Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.