GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1769SC-IF4IH

1769SC-IF4IH Image 1 thumbnail
1769SC-IF4IH Image 2 thumbnail
Manufacturer: Allen Bradley - Miscellaneous
Product Type: PLC/Programmable Logic Controller
Part Number: 1769SC-IF4IH
Series: CompactLogix

Description:

The Allen-Bradley 1769SC-IF4IH is a compact analog module that can be used in a variety of control systems. The module is equipped with 4 isolated channels and draws a current of 175 milliamperes at a rated voltage of 5 volts of direct current.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1769SC-IF4IH compact I/O analog module is a sophisticated signal-processing device that is designed to function in conjunction with I/O devices. The module is compatible with a range of signals and displays good conversion characteristics within a range of power requirements. The device does not have any fusing and can be isolated from the rest of the control system by using an isolation voltage of 710 volts of direct current. An isolation voltage of 500 volts of alternating current can also be supplied for a period of one minute to protect the module from external sources of electrical power. The module is equipped with 4 isolated channels that can facilitate modes of communication between the module and other components of the industrial automation system.

The Allen-Bradley 1769SC-IF4IH uses the HART communication network to process input signals and create an interface between components of the control system. The device has an excellent processing speed and has a maximum update time of only 10 milliseconds when it is used in conjunction with an input filter with a frequency of 360 Hertz. A removable terminal block is also provided with the module and the modular design of the device allows the user to mount and assemble the module with ease. The device also has a module status LED which is turned on when no faults are found by the power-up diagnostics system in the device. The module should be placed away from sources of electrical noise to obtain the highest possible efficiency from the system.

Technical Specifications

Brand: Allen-Bradley / Rockwell Automation
Series: Compact I/O Isolated HART Analog Module
Part Number: 1769SC-IF4IH
Channels: 4 isolated channels
Fault Detection: Over-range and under-range error bits
Voltage Terminal Impedance: 1M ohms
Current Terminal Impedance: 249 ohms
Minimum Update Time: 10 ms with 360 Hz filter
Maximum Update Time: 108 ms with 28.5 Hz filter
PCB spacing: 0.033in. (0.85mm)
Fusing: None
Isolation Voltage: 710V DC or 500V AC for one minute
Input Filter: 28.5 Hz, 50 Hz, 60.0 Hz, 300 Hz, 360 Hz
Power Requirement at 5V: 175 mA
Power Requirement at 24V: 60 mA
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1769SC-IF4IH?

Answer: Yes. We offer repairs for the 1769SC-IF4IH and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1769SC-IF4IH?

Answer: If you buy the 1769SC-IF4IH through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1769SC-IF4IH online?

Answer: Yes. Automation Stop sells the 1769SC-IF4IH online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1769SC-IF4IH?

Answer: The 1769SC-IF4IH is made by Allen Bradley - Miscellaneous.


Question: What type of product is the 1769SC-IF4IH?

Answer: The 1769SC-IF4IH is part of the CompactLogix series.


Question: What Brand: is included with the 1769SC-IF4IH?

Answer: The 1769SC-IF4IH has a AB / Rockwell Automation Brand:.


Question: What is the Channels: of the 1769SC-IF4IH?

Answer: The Channels: of the 1769SC-IF4IH is 4 isolated channels.


Question: What is the Current Terminal Impedance: of the 1769SC-IF4IH?

Answer: The Current Terminal Impedance: of the 1769SC-IF4IH is 249 ohms.


Question: What Fault Detection: does the Allen-Bradley 1769SC-IF4IH have?

Answer: The 1769SC-IF4IH has a Over-range and under-range error bits Fault Detection:.


Question: Does the Allen Bradley/Rockwell Automation 1769SC-IF4IH have a Fusing:?

Answer: None.


Question: What Input Filter: does the 1769SC-IF4IH have?

Answer: The Allen Bradley 1769SC-IF4IH has a Input Filter: of 28.5 Hz, 50 Hz, 60.0 Hz, 300 Hz, 360 Hz.


Question: What Isolation Voltage: does the 1769SC-IF4IH have?

Answer: The Isolation Voltage: of the 1769SC-IF4IH is 710 volts direct current or 710 volts AC (alternating current) for one minute.


Question: What Maximum Update Time: does the Allen Bradley 1769SC-IF4IH have?

Answer: The 1769SC-IF4IH has a Maximum Update Time: of 108 ms with 28.5 Hz filter.


Question: What is the Minimum Update Time: of the 1769SC-IF4IH?

Answer: The 1769SC-IF4IH has a Minimum Update Time: of 10 ms with 360 Hz filter.


Question: What is the unit Number: of the 1769SC-IF4IH?

Answer: The part Number: of the Allen Bradley Automation 1769SC-IF4IH is 1769SC-IF4IH.


Question: What PCB spacing: does the 1769SC-IF4IH have?

Answer: The PCB spacing: of the Allen-Bradley 1769SC-IF4IH is 0.033in. (0.85mm).


Question: What is the Power Requirement at 24 volts of the 1769SC-IF4IH?

Answer: The Power Requirement at 24 volts of the 1769SC-IF4IH is 60 mA.


Question: What Power Requirement at 5 volts does the Rockwell-Automation 1769SC-IF4IH have?

Answer: The 1769SC-IF4IH has a Power Requirement at 5 volts of 175 mA.


Question: What Series: does the 1769SC-IF4IH have?

Answer: The 1769SC-IF4IH has a Compact input/output Isolated HART Analog Module Series:.


Question: What is the Voltage Terminal Impedance: of the 1769SC-IF4IH?

Answer: The 1769SC-IF4IH has a Voltage Terminal Impedance: of 1M ohms.


Series information for 1769SC-IF4IH

For additional information about 1769SC-IF4IH check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1769SC-IF4IH.

Revision Part # Also Known As Availability
1769SC-IF4IH/A 1769SC-IF4IH Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1769SC-IF41H
  • 1769SC-1F4IH
  • 1769SC-1F41H
  • 17695C-IF4IH
  • 17695C-IF41H
  • 17695C-1F4IH
  • 17695C-1F41H
  • 17G9SC-IF4IH
  • 17G9SC-IF41H
  • 17G9SC-1F4IH
  • 17G9SC-1F41H
  • 17G95C-IF4IH
  • 17G95C-IF41H
  • 17G95C-1F4IH
  • 17G95C-1F41H
  • I769SC-IF4IH
  • I769SC-IF41H
  • I769SC-1F4IH
  • I769SC-1F41H
  • I7695C-IF4IH
  • I7695C-IF41H
  • I7695C-1F4IH
  • I7695C-1F41H
  • I7G9SC-IF4IH
  • I7G9SC-IF41H
  • I7G9SC-1F4IH
  • I7G9SC-1F41H
  • I7G95C-IF4IH
  • I7G95C-IF41H
  • I7G95C-1F4IH
  • I7G95C-1F41H

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP