GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440J-N21TNPM |
Series: | misc |
Description:
The 440J-N21TNPM is an Enabling Switch by Allen-Bradley and Rockwell Automation, as part of the Guardmaster series. This switch has a rated impulse withstand voltage of 2500 Volts (except push button switch) and a thermal current of 3 Amperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 440J-N21TNPM is an Enabling Switch that is manufactured and branded by Allen-Bradley and Rockwell Automation, as part of the Guardmaster series. It has a rated impulse withstand voltage of 2500 Volts (except push button switch) and a thermal current of 3 Amperes. The 440J-N21TNPM has a minimum current of 3 Volts, 5 milliamperes AC/DC and a short-circuit protection device with a 250 Volt, 10 Ampere fuse (IEC 60127-1). The 440J-N21TNPM has a pollution degree of three (3) and an operating force of approximately 15 N for Position 2 and 50 N (maximum) for Position 3. The 440J-N21TNPM has an actuation frequency maximum of 1200 operations per hour and has IP66 protection. Conduit entry is 1 x M20 (enclosed within the switch) and it has an applicable cable diameter of 7…13 millimeters (0.27…0.51 inches).
The 440J-N21TNPM has an insulation resistance of 100 M Ohms (minimum) and a contact resistance of 100 M Ohms (maximum). Contact and terminal temperature rise are both 30 degrees Celsius (86 degrees Fahrenheit) maximum. The approximate weight of the 440J-N21TNPM is 210 grams, or 7.4 ounces. Its standard color is black/gray and it has a PA66 case material. It uses NBR/PVC for its rubber boot material. The 440J-N21TNPM can operate in temperatures ranging between -10 and 60 degrees Celsius (14 to 140 degrees Fahrenheit). Grip switch, emergency stop, and push button electrical life are all 100,000 operations. Auxiliary contacts are rated at 1 N.C., emergency stop contacts at 2 N.C., and push button contact at 1 N.O.
Brand | Allen-Bradley/Rockwell Automation |
Bulletin | 440J |
Product Type | Enabling Switch |
Rated Impulse Withstand Voltage | 2500 Volts |
Thermal Current | 3 Amperes |
Minimum Current | 3 Volts, 5 Milliamperes AC/DC |
Short-Circuit Protection Device | 250 Volt, 10 Ampere Fuse |
Pollution Degree | 3 |
Operating Force | 15 N (Position 2), 50 N (Maximum, Position 3) |
Actuation Frequency (max.) | 1200 Operations per Hour |
Protection | IP66 |
Conduit Entry | 1 x M20 |
Insulation Resistance | 100 M Ohms (min.) |
Contact Resistance | 100 M Ohms (max.) |
Weight | 210 grams (7.4 ounces) |
Case Material | PA66 |
Question: Does Automation Stop offer repairs on the 440J-N21TNPM?
Answer: Yes. We offer repairs for the 440J-N21TNPM and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440J-N21TNPM?
Answer: If you buy the 440J-N21TNPM through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440J-N21TNPM online?
Answer: Yes. Automation Stop sells the 440J-N21TNPM online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440J-N21TNPM?
Answer: The 440J-N21TNPM is made by Allen Bradley - Miscellaneous.
Question: What is the Actuation Frequency (max.) of the 440J-N21TNPM?
Answer: The Actuation Frequency (max.) of the Allen Bradley-Rockwell Automation 440J-N21TNPM is 1200 Operations per Hour.
Question: What Brand is included with the 440J-N21TNPM?
Answer: The 440J-N21TNPM has a Allen Bradley (AB)/Rockwell Automation Brand.
Question: What Bulletin does the 440J-N21TNPM have?
Answer: The Allen Bradley-Rockwell Automation 440J-N21TNPM has a Bulletin of 440J.
Question: What Case Material does the Rockwell-Automation 440J-N21TNPM have?
Answer: The Rockwell-Automation 440J-N21TNPM has a Case Material of PA66.
Question: What Conduit Entry does the Allen Bradley-Rockwell Automation 440J-N21TNPM have?
Answer: The Allen Bradley-Rockwell Automation 440J-N21TNPM has a Conduit Entry of 1 x M20.
Question: What is the Contact Resistance of the 440J-N21TNPM?
Answer: The Allen-Bradley 440J-N21TNPM has a Contact Resistance of 100 M Ohms (max.).
Question: What Insulation Resistance does the 440J-N21TNPM have?
Answer: The Rockwell-Automation 440J-N21TNPM has a Insulation Resistance of 100 M Ohms (min.).
Question: What is the Minimum Current of the 440J-N21TNPM?
Answer: The Allen Bradley/Rockwell Automation 440J-N21TNPM has a Minimum Current of 3 Volts, 5 Milliamperes AC (alternating current)/direct current (DC).
Question: What is the Operating Force of the Allen-Bradley 440J-N21TNPM?
Answer: The 440J-N21TNPM has a Operating Force of 15 N (Position 2), 50 N (Maximum, Position 3).
Question: What Pollution Degree does the Allen Bradley 440J-N21TNPM have?
Answer: The Pollution Degree of the Allen Bradley 440J-N21TNPM is 3.
Question: What Product Type does the 440J-N21TNPM have?
Answer: The 440J-N21TNPM has a Enabling Switch Product Type.
Question: What is the Protection of the 440J-N21TNPM?
Answer: The Protection of the 440J-N21TNPM is IP66.
Question: What Rated Impulse Withstand Voltage does the 440J-N21TNPM have?
Answer: The 440J-N21TNPM has a Rated Impulse Withstand Voltage of 2500 Volts.
Question: What Short-Circuit Protection Device does the Rockwell-Automation 440J-N21TNPM have?
Answer: The 440J-N21TNPM has a Short-Circuit Protection Device of 250 Volt, 10 Ampere Fuse.
Question: What is the Thermal Current of the Allen Bradley 440J-N21TNPM?
Answer: The 440J-N21TNPM has a Thermal Current of 3 Amperes.
Question: What is the Weight of the 440J-N21TNPM?
Answer: The Weight of the 440J-N21TNPM is 210 grams (7.4 ounces).
For additional information about 440J-N21TNPM check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440J-N21TNPM.
Revision Part # | Also Known As | Availability |
---|---|---|
440J-N21TNPM/A | 440J-N21TNPM Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.