GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Industrial Computer |
Part Number: | 6155F-NPXPH |
Series: | misc |
Description:
Part Number 6155F-NPXPH is an Allen-Bradley industrial computer, contact type, without a display. The unit configuration is performance type with a 1 Gigahertz Intel Celeron processor, 2 gigabytes RAM, and 32 gigabytes SSD hard drive. There are 2 PS/2 ports, 4 USB ports, 1 VGA port, and 1 audio port available. It also has a card slot Compact Flash type II and two Ethernet LAN ports. Its power input is 100 to 240 volts AC and can be mounted via a DIN rail, VESA, wall or machine mounting.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley’s 6155F-NPXPH is a compact non-display industrial computer as part of the 200R family of products. The product range includes two general configurations: standard configuration and performance configuration. The 6155F-NPXPH is configured for performance. Its purpose is to provide the functionality and needed performance to run a visual interface, maintenance, and control applications. It has a 1 Gigahertz Intel Celeron M processor with RAM memory of 2 gigabytes and hard disk drive type SSD (solid state drive) with a capacity of 32 Gigabytes.
On the 6155F-NPXPH computer, there are two (2) PS/2 ports available, in which one (1) port is used to connect the keyboard and the other for the mouse. Also present are two (2) serial ports, four (4) USB type 2.0 ports, one (1) VGA port to connect external monitor, and one (1) for audio line output. It has two (2) Compact Flash type II card slots, in which one is internal and the other is external. There are also two LAN ports, type 10/100/1000 megabits per second. Power input of this unit auto ranges within 100 to 240 volts AC. The computer is compatible with versatile mounting systems, and it can be installed either on a wall, VESA, DIN rail or machine. A bracket with mounting screws is provided for each option. The whole unit, excluding the handle and connectors, has physical dimensions that measure 115 x 172 x 158 millimeters (4,51 x 6,77 x 6,22 inches). This device has a weight of approximately 5 kilograms (11 pounds).
Question: Does Automation Stop offer repairs on the 6155F-NPXPH?
Answer: Yes. We offer repairs for the 6155F-NPXPH and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 6155F-NPXPH?
Answer: If you buy the 6155F-NPXPH through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 6155F-NPXPH online?
Answer: Yes. Automation Stop sells the 6155F-NPXPH online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 6155F-NPXPH?
Answer: The 6155F-NPXPH is made by Allen Bradley - Miscellaneous.
For additional information about 6155F-NPXPH check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 6155F-NPXPH.
Revision Part # | Also Known As | Availability |
---|---|---|
6155F-NPXPH/A | 6155F-NPXPH Ser A, Series A, Rev A | Request a Quote |
6155F-NPXPH/B | 6155F-NPXPH Ser B, Series B, Rev B | Request a Quote |
6155F-NPXPH/C | 6155F-NPXPH Ser C, Series C, Rev C | Request a Quote |
6155F-NPXPH/D | 6155F-NPXPH Ser D, Series D, Rev D | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.