GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | AN-X2-AB-DHRIO |
Series: | misc |
Description:
This AN-X2-AB-DHRIO is a network connector module that is manufactured by Allen-Bradley. This connector module helps to connect ControlLogix PLCs with the remote input/output network. This connector module has one input/output channel. The module has a maximum power consumption of 200 mA at 12 VDC or 100 mA at 24 VDC. The AN-X2-AB-DHRIO has a baud rate of 57.6 to 230.4 kbaud. The module has a power dissipation rate of 2.4 watts.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The AN-X2-AB-DHRIO is a network connector module that belongs to Allen-Bradley Ethernet/IP to DH+ or RIO network connector. This network connector helps to connect a ControlLogix program logical controller (PLC) or the other types of suitable devices for the Allen-Bradley remote I/O network. This communication module is available with one I/O channel. This module supports all remote I/O baud rates from the range of 57.6 to 230.4 bauds and also supports rack numbers from 0-76 octal. This network connector can be connected with the ControlLogix processor using a scheduled connection over the Ethernet. This connector is available with two LED indicators to show the Ethernet connection status, and another LED is fixed to show the internal communication state. The operating temperature of this communication module is in the range between 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit). This module can be mounted using a DIN rail. The power consumption rating of this module is 200 mA, and the voltage rating is 12 volts DC or 100 milliamps with 24 volts DC. The dissipation power of this module is 2.4 watts, and this module also helps to replace existing remote I/O PLCs. This communication module helps to create new controller programs without interruption of existing control resulting in the downtime being minimized. This module is available with a single RJ 45 10/100 Mbps Ethernet port, one phoenix 3-pin power connector, and a single phoenix 3-pin network connector.
Question: Does Automation Stop offer repairs on the AN-X2-AB-DHRIO?
Answer: Yes. We offer repairs for the AN-X2-AB-DHRIO and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and AN-X2-AB-DHRIO?
Answer: If you buy the AN-X2-AB-DHRIO through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the AN-X2-AB-DHRIO online?
Answer: Yes. Automation Stop sells the AN-X2-AB-DHRIO online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the AN-X2-AB-DHRIO?
Answer: The AN-X2-AB-DHRIO is made by Allen Bradley - Miscellaneous.
For additional information about AN-X2-AB-DHRIO check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding AN-X2-AB-DHRIO.
Revision Part # | Also Known As | Availability |
---|---|---|
AN-X2-AB-DHRIO/A | AN-X2-AB-DHRIO Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.