GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | E192988 |
Series: | misc |
Description:
The E192988 is an inverter module made by Allen-Bradley. It is an LCD inverter that is compatible with a variety of laptop computers. This module has an alternative designation of AS023172C10 and a part number of 2945006101. It has an input voltage limit of 250 Volts AC and a maximum current draw of 10 Amperes. The Output current rating is 5 Amperes at 30 Volts DC. The module weighs 0.13 pounds.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This is the E192988 inverter module. It is manufactured by ECT Allen-Bradley and is used to replace a unit in a personal computer. This part is common for laptop computers made by a variety of manufacturers. OEMs (Original Equipment Manufacturers) generally use parts that are common in their devices in order to save on cost. These parts are standardized and offer the same functionality in a variety of computers. The user is also able to use the same part made by any manufacturer and install it on any compatible personal computer. This module is also available with the part numbers 2945006101 and AS023172C10. An SKU designation for this module is SD13493. The module has an input current draw rating of 10 Amperes. It uses an input power supply with a voltage rating of up to 250 Volts AC. The module has a rated operating voltage of 12 Volts DC. The output power is provided with a DC voltage of 30 Volts maximum. The output current rating is 5 Amperes for this inverter module. The approximate weight of this unit is 0.13 pounds. The Allen-Bradley version of this component is also available with a plastic covering enclosure. The module has a LED display showing the power output status. It shows the voltage, current, and operating frequency output that the inverter is producing. It has a keypad for input and an analog knob for controlling device parameters and adjusting the required output parameters. The module also has two LED indicators for program and fault status.
Question: Does Automation Stop offer repairs on the E192988?
Answer: Yes. We offer repairs for the E192988 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and E192988?
Answer: If you buy the E192988 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the E192988 online?
Answer: Yes. Automation Stop sells the E192988 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the E192988?
Answer: The E192988 is made by Allen Bradley - Miscellaneous.
For additional information about E192988 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding E192988.
Revision Part # | Also Known As | Availability |
---|---|---|
E192988/A | E192988 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.