GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | MPS-B330P-M-X156 |
Series: | MPS Servo Motors |
Description:
Designed and produced by the company known as Allen Bradley / Rockwell Automation, part number MPS-B330P-M-X156 is an MP-series servo motor that is made from stainless-steel. This servo motor belongs to the 400-volt voltage class of servo motors. It has a frame that measures 100 millimeters and has a magnetic stack length of 3.0 inches. The rated speed of this servo motor is 5000 rpm. This motor has a multi-turn high-resolution encoder which is used for feedback purposes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The MPS-B330P-M-X156 is a stainless-steel servo motor from the Kinetix MPS family. This device was specifically designed for use in washdown environments. It is equipped with rotors that can withstand high pressure and caustic treatments. This servo motor is used in industries such as food, beverage, brewery, dairy, pharmaceutical, and health and beauty product manufacturing facilities, all of which require strict sanitary regulations. The MPS-B330P-M-X156 has a rated power of 1.3 kilowatts, a rated inertia of 0.00012 kg-m² (0.0010 lb-in-s²), a continuous stall torque of 3.6 N-m (32 lb-in), and a peak stall torque of 11.1 N-m (98 lb-in). The rated speed of this motor is 5000 revolutions per minute (rpm). The weight of this servo motor is 7.4 kilograms, or the equivalent of 16.2 pounds. Although the MPS-B330P-M-X156 already has a shaft seal, it is recommended that it be replaced and serviced at least once a year or every three months to maintain environmental and conservation qualifications. The MPS-B330P-M-X156 servo motor is made of stainless steel and is rated at 400 volts. The MPS-B330P-M-X156 has a 100-millimeter frame and a magnetic stack length that measures 76.2 millimeters. The MPS-B330P-M-X156 has a 1024 sin/cos multiturn absolute encoder with IEC metric mounting holes that are of type FT. The manufacturer recommends using the servo motor in an environment with an ambient temperature between 0 and 60 degrees Celsius. This servo motor must be disconnected from the mains for maintenance or replacement. For further technical information, please read through the product's manual.
Question: Does Automation Stop offer repairs on the MPS-B330P-M-X156?
Answer: Yes. We offer repairs for the MPS-B330P-M-X156 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and MPS-B330P-M-X156?
Answer: If you buy the MPS-B330P-M-X156 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPS-B330P-M-X156 online?
Answer: Yes. Automation Stop sells the MPS-B330P-M-X156 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPS-B330P-M-X156?
Answer: The MPS-B330P-M-X156 is made by Allen Bradley - Miscellaneous.
Question: What type of product is the MPS-B330P-M-X156?
Answer: The MPS-B330P-M-X156 is part of the MPS Servo Motors series.
Question: What revolutions per minute (RPM) is included with the Allen Bradley - Miscellaneous MPS-B330P-M-X156?
Answer: The MPS-B330P-M-X156 by Allen Bradley - Miscellaneous has a revolutions per minute (RPM) of 5000.
For additional information about MPS-B330P-M-X156 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPS-B330P-M-X156.
Revision Part # | Also Known As | Availability |
---|---|---|
MPS-B330P-M-X156/A | MPS-B330P-M-X156 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.