GE / IP FANUC Series 90/30 In Stock

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

SST-PB3-SLC

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: SST-PB3-SLC
Series: SST

Description:

The Allen Bradley SLC 500 modules are supported by this Woodhead SST-PB3-SLC communication module. Part number SST-PB3-SLC features one channel and one 9-pin serial interface, and it allows 2064 bytes of input and output. The SST-PB3-SL module weighs approximately 430 grams (0.95 pounds). In addition to that, the SST-PB3-SL includes a status LED that shows system information. This device has an operating temperature range of 0 to 50 degrees Celsius.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

The SST-PB3-SLC module is designed as a communication module, and it is compatible with Allen Bradley / Rockwell Automation's SLC 500 modules. This module connects to the PROFIBUS network. This device has an embedded 9-pin serial interface that allows input / output settings to be uploaded. In addition to that, the SST-PB3-SLC has a maximum input and output capacity of 2064 bytes, and it features one (1) communication channel. Moreover, the Woodhead SST-PB3-SLC communication module requires up to seven hundred and fifty (750) milliamperes (mA) of current at five (5) volts of direct current (DC) as power input. To avoid electrical harm to the device, operators must ensure to disconnect from power sources during installation and removal of this module. For locations with excessive electrical noise, the installation of an extra isolation transformer is advised to ensure appropriate functioning. The SST-PB3-SL has an inbuilt status LED that displays system status. When there is no network available, the COMM indicator turns green. However, errors in the network cause the LED to turn red. This module also has a watchdog timer. This capability allows the SST-PB3-SL to validate connectivity with the SLC processor and is activated after powering on or resetting the device. The timer is set to one (1) second by default. The scanner will display an error if there is no I/O update within the given period. The SST-PB3-SL module weighs approximately 430 grams, or the equivalent of 0.95 pounds. The operating temperature of this device ranges from 0 to 50 degrees Celsius, while the storage temperature should range from -40 to 85 degrees Celsius. 

Technical Specifications

Type Profibus Module
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the SST-PB3-SLC?

Answer: Yes. We offer repairs for the SST-PB3-SLC and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and SST-PB3-SLC?

Answer: If you buy the SST-PB3-SLC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the SST-PB3-SLC online?

Answer: Yes. Automation Stop sells the SST-PB3-SLC online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the SST-PB3-SLC?

Answer: The SST-PB3-SLC is made by Allen Bradley - Miscellaneous.


Series information for SST-PB3-SLC

For additional information about SST-PB3-SLC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding SST-PB3-SLC.

Revision Part # Also Known As Availability
SST-PB3-SLC/A SST-PB3-SLC Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • SST-PB3-5LC
  • SST-P83-SLC
  • SST-P83-5LC
  • S5T-PB3-SLC
  • S5T-PB3-5LC
  • S5T-P83-SLC
  • S5T-P83-5LC
  • 5ST-PB3-SLC
  • 5ST-PB3-5LC
  • 5ST-P83-SLC
  • 5ST-P83-5LC
  • 55T-PB3-SLC
  • 55T-PB3-5LC
  • 55T-P83-SLC
  • 55T-P83-5LC

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP