GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

TL-A230P-BJ34AA

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: TL-A230P-BJ34AA
Series: TLY and TL Servo Motors

Description:

The servo motor of TL series, TL-A230P-BJ34AA employs the use of permanent magnets arranged in stacks of 3 inches. It is three phase and has 8 poles. It operates at a maxim speed of 500 revolutions per minute and utilizes a voltage of 230 volts AC. The continuous power output is 0.32 kilowatts, and the stall current is rated 4.9 amperes when operating continuously. The continuous stall torque is rated at 1.16 Newton-meters.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The TL-A230P-BJ34AA is a three phase servo motor of the Bulletin TL series and it contains 8 poles. The speed of operation is 5000 revolutions per minute. This device utilizes as little inertia as possible by employing powerful permanent magnets, which are arranged within the motors in a 3 inches long stack. The device has shaft key but has no shaft seal. The rated operating voltage of this device is 230 volts. The continuous power output is rated at 0.32 kilowatts (0.43 horsepower). The continuous stall current of this device is rated at 4.9 amperes. The stall-torque is considered to be 1.16 Newton-meters(Nm) and is continuous. The maximum stall torque at peak 3.05 Newton-meters.

When in use, this device should be exposed to temperatures that are between 0 to 40 degrees Celsius but when in storage, the ambient temperature that the device should be subjected to should lie between -10 to 85 degrees Celsius. The relative humidity of the surrounding area should be kept between twenty percent (20%) and eighty-four percent (84%), while also being non-condensing. It has an electrical motor insulation of class F. 

The motor's weight is 1.8 kilograms. The enclosure has a National Electrical Manufacturer Association (NEMA) rating of IP65, thus offering protection against the entrance of liquid and dust with installation of shaft seal. The maximum shock that the device can resist is 20 g and the maximum vibrations that the device can withstand is 2.5 g at a frequency of 30 hertz to 2000 hertz.

Technical Specifications

Manufacturer Allen Bradley
Series TL-Series Motors
Product Type Brushless AC Synchronous Servo Motors
Kinetix Compatibility -
Frame Sizes Metric only frame sizes
Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets
Cable Extensions 1 m (3.2ft)
Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information
Continuous stall torque 0.086...5.42 N*m (0.76...48 lb*in)
Peak stall torque 0.22...13 N*m (1.94...115 lb*in)
Motor rated output 0.037...2.0 kW
Compatible servo drives Kinetix 3
Voltage Class 200V-class windings
Frame Size 70 mm (2.75 in.) or NEMA 23
Motor stack length Three stack
Rated Speed 5000 rpm
Feedback Multi-turn (Single turn if used without battery backup), 17-bit (131,072) counts/revolution, absolute, battery-backed encoder (serial protocol)
Enclosure IP65 housing
Shaft key Has Shaft key
Shaft Seal No Shaft seal
Connectors Cables with rectangular connectors, 300 mm (11.8 in.)
Brake 24V DC Brake
Factory Options Standard Metric
MPN TL-A230P-BJ34AA
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the TL-A230P-BJ34AA?

Answer: Yes. We offer repairs for the TL-A230P-BJ34AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and TL-A230P-BJ34AA?

Answer: If you buy the TL-A230P-BJ34AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the TL-A230P-BJ34AA online?

Answer: Yes. Automation Stop sells the TL-A230P-BJ34AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the TL-A230P-BJ34AA?

Answer: The TL-A230P-BJ34AA is made by Allen Bradley - Miscellaneous.


Question: What type of product is the TL-A230P-BJ34AA?

Answer: The TL-A230P-BJ34AA is part of the TLY and TL Servo Motors series.


Question: What is the Brake of the TL-A230P-BJ34AA?

Answer: The Brake of the Allen Bradley/Rockwell Automation TL-A230P-BJ34AA is 24 volts direct current (DC) Brake.


Question: What is the Cable Extensions of the TL-A230P-BJ34AA?

Answer: The Allen Bradley/Rockwell Automation TL-A230P-BJ34AA has a Cable Extensions of 1 m (3.2ft).


Question: What kind of Certifications does the Allen-Bradley TL-A230P-BJ34AA have?

Answer: The TL-A230P-BJ34AA has Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information.


Question: What is the Compatible servo drives of the TL-A230P-BJ34AA?

Answer: The Compatible servo drives of the Allen Bradley-Rockwell Automation TL-A230P-BJ34AA is Kinetix 3.


Question: What Connectors does the TL-A230P-BJ34AA have?

Answer: The Connectors of the TL-A230P-BJ34AA is Cables with rectangular connectors, 300 mm (11.8 in.).


Question: What Continuous stall torque does the Allen Bradley-Rockwell Automation TL-A230P-BJ34AA have?

Answer: The TL-A230P-BJ34AA has a Continuous stall torque of 0.086...5.42 N*m (0.76...48 lb*in).


Question: What is the Enclosure of the TL-A230P-BJ34AA?

Answer: The Enclosure of the Rockwell Automation TL-A230P-BJ34AA is IP65 housing.


Question: What kind of Factory Options does the Allen-Bradley TL-A230P-BJ34AA have?

Answer: The Allen-Bradley TL-A230P-BJ34AA includes Standard Metric for its Factory Options.


Question: What is the Feedback of the TL-A230P-BJ34AA?

Answer: The Allen Bradley-Rockwell Automation TL-A230P-BJ34AA has a Feedback of Multi-turn (Single turn if used without battery backup), 17-bit (131,072) counts/revolution, absolute, battery-backed encoder (serial protocol).


Question: What is the Frame Size of the TL-A230P-BJ34AA?

Answer: The Allen Bradley TL-A230P-BJ34AA has a Frame Size of 70 mm (2.75 in.) or NEMA 23.


Question: What Frame Sizes are included with the Allen Bradley/Rockwell Automation TL-A230P-BJ34AA?

Answer: The TL-A230P-BJ34AA has Frame Sizes Metric only frame sizes.


Question: What Kinetix Compatibility does the Rockwell-Automation TL-A230P-BJ34AA have?

Answer: The TL-A230P-BJ34AA has a - Kinetix Compatibility.


Question: What Magnets are included with the TL-A230P-BJ34AA?

Answer: The Allen Bradley Automation TL-A230P-BJ34AA has Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets.


Question: What is the Motor rated output of the Allen Bradley-Rockwell Automation TL-A230P-BJ34AA?

Answer: The TL-A230P-BJ34AA has a Motor rated output of 0.037...2.0 kW.


Question: What Motor stack length is included with the Allen Bradley-Rockwell Automation TL-A230P-BJ34AA?

Answer: The Allen Bradley-Rockwell Automation TL-A230P-BJ34AA has a Three stack Motor stack length.


Question: What Peak stall torque does the TL-A230P-BJ34AA have?

Answer: The Peak stall torque of the Rockwell-Automation TL-A230P-BJ34AA is 0.22...13 N*m (1.94...115 lb*in).


Question: What Product Type does the TL-A230P-BJ34AA have?

Answer: The TL-A230P-BJ34AA has a Brushless alternating current (AC) Synchronous Servo Motors Product Type.


Question: What is the Rated Speed of the TL-A230P-BJ34AA?

Answer: The Allen-Bradley TL-A230P-BJ34AA has a Rated Speed of 5000 revolutions per minute (RPM).


Question: What Shaft key does the TL-A230P-BJ34AA have?

Answer: The Allen Bradley TL-A230P-BJ34AA has a Has Shaft key Shaft key.


Question: Does the Allen Bradley/Rockwell Automation TL-A230P-BJ34AA have a Shaft Seal?

Answer: No Shaft seal.


Question: What Voltage Class does the TL-A230P-BJ34AA have?

Answer: The Allen Bradley TL-A230P-BJ34AA has a Voltage Class of 200V-class windings.


Series information for TL-A230P-BJ34AA

For additional information about TL-A230P-BJ34AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding TL-A230P-BJ34AA.

Revision Part # Also Known As Availability
TL-A230P-BJ34AA/A TL-A230P-BJ34AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • TL-A230P-8J34AA
  • TL-A23OP-BJ34AA
  • TL-A23OP-8J34AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP