GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

630-C3E40

✓ In Stock

Manufacturer: DVT Cognex Vision
Product Type: Automation Product
Part Number: 630-C3E40
Series: DVT Cognex
UPC: 110797838868

Description:

The Cognex 630-C3E40 is a smart image sensor camera that can be employed for high-precision measurement and machine vision applications. This camera offers high-resolution CCD imaging with electronic shuttering times from 10 microseconds to 1 second. The device supports a regulated and isolated power supply with an input voltage of 24 Volts DC.


Key Features:

  • has voltage rating of 24v dc

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$1,595.00

Available: 2

What is Refurbished

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Cognex 630-C3E40 is a smart image sensor camera that can be employed for high-precision measurement and machine vision applications. This camera offers high-resolution CCD imaging with electronic shuttering times from 10 microseconds to 1 second. The device supports a regulated and isolated power supply with an input voltage of 24 Volts DC. The image sensor draws a current of 210 milliamperes and 1.710 Amperes when using a DVT LED strobe light. The 630-C3E40 can be programmed and configured using Windows programming software. This camera consumes a power of 5 Watts. The image sensor includes an RJ-45 Ethernet port with a data rate of either 10 Megabytes or 100 Megabytes for TCP/IP communication protocol with a PC. The 630-C3E40 can be mounted using four (4) M4 threaded holes.

The 630-C3E40 provides a CCD image sensor with a resolution of 640 x 480 pixels. The image sensor needs a DVT breakout board to connect I/O and power sources. This camera also contains an RJ-11 connector for RS-422 and RS-232 serial communication to download the firmware, configure the TCP/IP parameters, and communicate with other serial devices. The 630-C3E40 also includes a power connector to link with either the I/O or the Series 600 I/O and a 15-pin digital I/O connector. This camera supports either an optional light source or a standard LED strobe light. The 630-C3E40 weighs approximately 170 grams (0.37 pounds) while shipping and operates at zero (0) to 45 degrees Celsius (32 to 113 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand Cognex
Series Series 600
Part Number 630-C3E40
Voltage Rating 24V DC
Power 5 Watts
Current Rating 210mA @ 24Volts + 1.25A if using a DVT LED strobe light
Dedicated Illumination Standard LED strobe light or optional light source
Cables 15-pin high-density D-Sub Connector
RJ-45 Ethernet Connector Yes
RJ-12 Cable Yes
External Ports 15 pin high density DB Subconnector (Power and Digital I/O), RJ-45 (10/100 megabit Ethernet communications, TCP/IP protocol), RJ-11 (RS-422 serial communications)
Digital I/O 24 Volts DC regulated, 12 configurable inputs & outputs, current sinking inputs, PNP (current sourcing) outputs, active high signals. Input can sink up to 1.5mA and outputs source a maximum of 100mA.
Size 114mm x 55mm x 40mm (not including lens) + additional 50mm cable clearance
Mounting Four M4 threaded holes (on bottom of unit), 7.9mm depth
Image Sensor 4.8mm x 3.6mm (1/3” format) CCD, 640 x 480 pixel resolution, 7.4 μm x 7.4 μm, square pixels
Electronic Shuttering 10μs – 1s exposure times
Operating Temperatures 0-45° C, 32-113° F
Weight 170 g (0.34 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 630-C3E40?

Answer: Yes. We offer repairs for the 630-C3E40 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the DVT Cognex Vision and 630-C3E40?

Answer: If you buy the 630-C3E40 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 630-C3E40 online?

Answer: Yes. Automation Stop sells the 630-C3E40 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 630-C3E40?

Answer: The 630-C3E40 is made by DVT Cognex Vision.


Question: What Brand is included with the 630-C3E40?

Answer: The Allen Bradley/Rockwell Automation 630-C3E40 has a Cognex Brand.


Question: What is the Cables of the Rockwell Automation 630-C3E40?

Answer: The 630-C3E40 has a Cables of 15-pin high-density D-Sub Connector.


Question: What is the Current Rating of the Allen Bradley-Rockwell Automation 630-C3E40?

Answer: The Current Rating of the Allen Bradley-Rockwell Automation 630-C3E40 is 210mA @ 24Volts + 1.25A if using a DVT LED strobe light.


Question: What Dedicated Illumination is included with the 630-C3E40?

Answer: The Allen-Bradley 630-C3E40 has a Standard LED strobe light or optional light source Dedicated Illumination.


Question: What is the Digital input/output of the Rockwell-Automation 630-C3E40?

Answer: The 630-C3E40 has a Digital input/output of 24 Volts direct current regulated, 12 configurable inputs & outputs, current sinking inputs, PNP (current sourcing) outputs, active high signals. Input can sink up to 1.5mA and outputs source a maximum of 100mA..


Question: What Electronic Shuttering does the 630-C3E40 have?

Answer: The Electronic Shuttering of the Allen-Bradley 630-C3E40 is 10μs – 1s exposure times.


Question: What is the External Ports of the 630-C3E40?

Answer: The Allen Bradley-Rockwell Automation 630-C3E40 has a External Ports of 15 pin high density DB Subconnector (Power and Digital input/output), RJ-45 (10/100 megabit Ethernet communications, TCP/IP protocol), RJ-11 (RS-422 serial communications).


Question: What Image sensor component does the Rockwell-Automation 630-C3E40 have?

Answer: The Image sensor component of the Rockwell-Automation 630-C3E40 is 4.8mm x 3.6mm (1/3” format) CCD, 640 x 480 pixel resolution, 7.4 μm x 7.4 μm, square pixels.


Question: What Mounting does the Rockwell-Automation 630-C3E40 have?

Answer: The Mounting of the 630-C3E40 is Four M4 threaded holes (on bottom of unit), 7.9mm depth.


Question: What is the Operating Temperatures of the 630-C3E40?

Answer: The Operating Temperatures of the 630-C3E40 is 0-45° C, 32-113° F.


Question: What part Number does the Allen Bradley/Rockwell Automation 630-C3E40 have?

Answer: The 630-C3E40 has a part Number of 630-C3E40.


Question: What is the Power of the Rockwell-Automation 630-C3E40?

Answer: The 630-C3E40 has a Power of 5 Watts.


Question: Does the Allen Bradley Automation 630-C3E40 have a RJ-12 Cable?

Answer: Yes.


Question: Does the 630-C3E40 have a RJ-45 Ethernet Connector?

Answer: Yes.


Question: What is the Size of the 630-C3E40?

Answer: The 630-C3E40 has a Size of 114mm x 55mm x 40mm (not including lens) + additional 50mm cable clearance.


Question: What is the Voltage Rating of the 630-C3E40?

Answer: The Voltage Rating of the 630-C3E40 is 24 volts direct current (DC).


Question: What is the Weight of the Allen Bradley Automation 630-C3E40?

Answer: The Weight of the 630-C3E40 is 170 g (0.34 lb).


Series information for 630-C3E40

For additional information about 630-C3E40 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 630-C3E40.

Revision Part # Also Known As Availability

Common Misspellings:

  • 630-C3E4O
  • 63O-C3E40
  • 63O-C3E4O
  • G30-C3E40
  • G30-C3E4O
  • G3O-C3E40
  • G3O-C3E4O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP