GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC610CHS100 |
Series: | Series One |
UPC: | 279426377588 |
Description:
Part number IC610CHS100 is an I/O rack from the Series One line of products. This device was designed and manufactured by Emerson - GE Fanuc. This product features five (5) racks and also has two (2) keyholes. This device has an AC voltage range of 115 volts AC to 230 volts AC, as well as a DC voltage range of 24 volts DC to 48 volts DC. This Emerson - GE Fanuc device is UL listed.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC610CHS100 is an I/O rack from the Series One product line. This device was designed and manufactured by Emerson - GE Fanuc. This module is a non-expandable I/O rack. It comes with five (5) slots and is a product type that is specially engineered to perform the operations of a power supply unit rack. Its power supply features five (5) Hi Cap slots and a 115 volts or 230 volts AC voltage rating for operation. However, its voltage ranges may differ based on the operations it performs. The rack weighs roughly 4 pounds. Besides that, the racks are available in six (6) distinct configurations, with AC input power ranging from 115 to 230 volts and the DC (direct current) input power ranging from twenty-four (24) to forty-eight (48) volts. There are two (2) five slots on this unit. It is a minimal five (5)-slot rack with no expansion slots for a twenty-four (24) volts DC external power supply or a RUN relay. This module supports brackets holding this I/O rack with two (2) keyholes on either side of the rack. This input and output rack unit from the Series One product line is capable of seamless integration with the computers using industrial CPU connectors, which users can easily mount on the rack. That said, the adaptability and flexibility of employing it with the compatible units from the Emerson - GE Fanuc infrastructure are excellent. Apart from that, this device also meets industry standards and has been listed by UL.
Question: Does Automation Stop offer repairs on the IC610CHS100?
Answer: Yes. We offer repairs for the IC610CHS100 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC610CHS100?
Answer: If you buy the IC610CHS100 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC610CHS100 online?
Answer: Yes. Automation Stop sells the IC610CHS100 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC610CHS100?
Answer: The IC610CHS100 is made by Emerson - GE Fanuc.
For additional information about IC610CHS100 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC610CHS100.
Revision Part # | Also Known As | Availability |
---|---|---|
IC610CHS100B | IC610CHS100 Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.