GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC610CPU106 |
Series: | Series One |
UPC: | 502274408488 |
Description:
The GE Fanuc IC610CPU106 is a CPU module that operates with Series One Programmable Controllers. This CPU module includes an upgraded 3.7K Word memory capacity allowing it to operate advanced programs using ladder logic. The CPU is able to scan a maximum capacity program in just 36 milliseconds. It offers timers that can be programmed at 0.1 or 0.01 second intervals. It offers 64 registers and allows up to 128 registers if timers and counters are not used.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC610CPU106 is a CPU module belonging to the Series One product line offered by Emerson - GE Fanuc. This Central Processing Unit offers scan times as low as 36 milliseconds for a 3.7K word program. The total real scan time includes overhead time, which is typically measured at 4 to 5 milliseconds. The CPU only scans programmed memory. It includes a memory capacity of up to 3700 words and features CMOS memory. The CPU includes timers that are programmable to 0.01 seconds instead of the standard 0.1 seconds. The module supports up to 168 I/O devices nd can handle up to 96 remote systems. This unit includes 144 internal coils including 4 coils reserved for special functions and 28 retentive coils. The CPU has 64 timers and counters that operate using 4 digits. Up to 128 shift register stages are offered in this CPU, and the module includes 64 sequencers at 1000 steps each. The module offers 64 data registers that store memory in a 16-bit format. The number of data registers increases to 124 with unused T/C references. The CPU has a typical battery life between 2 to 5 years when loaded and between 8 to 10 years when unloaded. The AC power required by the 1C610CHS101 / 110 / 130 rack is rated at 115 volts to 230 volts AC with a rated power of 30 volt-amperes at maximum load. The DC power required is rated at 30 volts DC at maximum usage, with an output current rating of 1.4 amperes at 5 volts DC.
Question: Does Automation Stop offer repairs on the IC610CPU106?
Answer: Yes. We offer repairs for the IC610CPU106 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC610CPU106?
Answer: If you buy the IC610CPU106 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC610CPU106 online?
Answer: Yes. Automation Stop sells the IC610CPU106 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC610CPU106?
Answer: The IC610CPU106 is made by Emerson - GE Fanuc.
For additional information about IC610CPU106 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC610CPU106.
Revision Part # | Also Known As | Availability |
---|---|---|
IC610CPU106B | IC610CPU106 Series B, Rev B | Request a Quote |
IC610CPU106C | IC610CPU106 Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.