GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC610MDL107 |
Series: | Series One |
UPC: | 266827737851 |
Description:
Part number IC610MDL107, which was designed and manufactured by Allen Bradley / Rockwell Automation, is a direct current (DC) input module. This module is equipped with 16 input circuits, 16 LED indicators, and a removable terminal board. This module has an internal power source rated at 24 volts DC. This device has an open-circuit voltage of 36 volts DC. It also has an input current rating of 17 milliamperes, as well as an off-leakage current of 1 ampere.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC610MDL107 is a direct current (DC) sink input module by GE Fanuc. This module has sixteen (16) input circuits that can receive a single discrete signal (ON or OFF) from the input devices. It has sixteen (16) embedded light-emitting diodes (LEDs) to indicate the status of these sixteen (16) input circuits, with each input circuit has its corresponding LED. The sixteen (16) input circuits are split into two (2) groups. Each input group has eight (8) input circuits and one (1) common terminal. The common terminals of these two (2) input groups are internally connected. This module requires 24 volts of direct current (DC) to sense the state of input circuits. This module has a 24 volts DC internal power supply and does not need an external power source. Each open input circuit can have a maximum voltage of 36 volts DC. The input current rating of the module is 17 milliamperes. The module's maximum off-leakage current is 1 ampere, while its lowest on-current rating is 5 milliamperes. The IC610MDL107 consumes 25 milliamperes of current at a DC voltage of 9 volts. This module's OFF to ON response time is 3 to 15 milliseconds, and the ON to OFF response time is 4 to 15 milliseconds. The approximate weight of the GE Fanuc IC610MDL107 is 170 grams. This module has a removable terminal board. This socket-type terminal board allows the connection of user devices to the input circuits. Limit switches, pushbuttons, selector switches, and relaying contacts are examples of common user devices that may be connected.
Question: Does Automation Stop offer repairs on the IC610MDL107?
Answer: Yes. We offer repairs for the IC610MDL107 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC610MDL107?
Answer: If you buy the IC610MDL107 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC610MDL107 online?
Answer: Yes. Automation Stop sells the IC610MDL107 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC610MDL107?
Answer: The IC610MDL107 is made by Emerson - GE Fanuc.
For additional information about IC610MDL107 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC610MDL107.
Revision Part # | Also Known As | Availability |
---|---|---|
IC610MDL107A | IC610MDL107 Series A, Rev A | Request a Quote |
IC610MDL107B | IC610MDL107 Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.