GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC610MDL116 |
Series: | Series One |
UPC: | 972278861228 |
Description:
Designed and manufactured by Emerson - GE Fanuc, product number IC610MDL116 is an analog input module belonging to the Series One product line. This device has 4 independent analog input channels. This module has an input voltage range of 1 to 5 volts DC and an input current range of 4 to 20 milliamperes. This module has an 8-bit binary resolution. The operating temperature range of this GE Fanuc analog input module is 0 to 60 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC610MDL116 is an analog Input module that was designed and manufactured by the company known as Emerson - GE Fanuc. This product belongs to the Series One product line. This module has four independent analog input channels with differential inputs. It has one 8 bits, binary data digital output and one 4 bits, channel status digital output. The module is DC actuated with voltage inputs of 1 to 5 volts direct current (DC) or current inputs of 4 to 20 milliamperes. This module converts an analog input signal to a digital signal for programmable controllers to use. Its resolution is 8 bits, meaning the maximum digital value that can be converted is 255. This GE Fanuc analog input module is powered via an external power supply rated at 24 volts DC. The power consumption rating of this device is 9 volts DC at 55 milliamperes.
The IC610MDL116 analog Input module is compatible with Series One and One Plus programmable controllers. However, the input can only be provided in binary form with a Series One PC. The faceplate of the module is equipped with 16 LEDs for binary data display. The faceplate also holds pushbuttons for user channel selection and a removable terminal board for field wiring. The module uses the Successive Approximation Method for analog to digital conversion, with a maximum conversion time of 2 milliseconds. Its maximum accuracy and linearity error is rated at ±21% at 25 degrees Celsius and ±8%. This module should be operated within an environment where the temperature ranges from 0 to 60 degrees Celsius, or 32 to 140 degrees Fahrenheit. The relative humidity levels suitable for this device range from 5% to 95% non-condensing.
Question: Does Automation Stop offer repairs on the IC610MDL116?
Answer: Yes. We offer repairs for the IC610MDL116 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC610MDL116?
Answer: If you buy the IC610MDL116 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC610MDL116 online?
Answer: Yes. Automation Stop sells the IC610MDL116 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC610MDL116?
Answer: The IC610MDL116 is made by Emerson - GE Fanuc.
For additional information about IC610MDL116 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC610MDL116.
Revision Part # | Also Known As | Availability |
---|---|---|
IC610MDL116A | IC610MDL116 Series A, Rev A | Request a Quote |
IC610MDL116B | IC610MDL116 Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.