GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC610MDL155 |
Series: | Series One |
UPC: | 443816149493 |
Description:
The GE Fanuc Emerson IC610MDL155 is a source output module that includes eight outputs that deliver a voltage of 24 volts DC. The module outputs are grouped into two groups of four outputs. The IC610MDL155 weighs approximately 120 grams (0.26 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC610MDL155 is a source output module that includes eight (8) output points that deliver a voltage rating range from 5 volts DC to 24 volts DC. The module outputs are grouped into two groups of four outputs that are labeled with green LED indicators to show the on/off status of outputs. Each group is protected by a 3 amperes fuse. The IC610MDL155 can be easily mounted in any input or output slot of the system. The output module provides an on response time of 100 microseconds and an off response time of 100 microseconds. The module can be employed for incandescent and inductive loads such as indicator lights, relay coils, motor starters, and solenoid valves. The wiring connections of this module are connected to screw terminals on a faceplate terminal block by employing either two 14 AWG wires or a single 12 AWG wire.
The IC610MDL155 draws a current of 30 milliamperes at a voltage of 9 volts DC. The module outputs deliver a current of 500 milliamperes per point. The IC610MDL155 has an output voltage drop of 1 volt and a leakage current of 100 microamperes at 24 volts DC. This device supports a peak voltage of 40 volts DC. This unit supports a non-condensing relative humidity range from 5 percent to 95 percent and a vibration frequency range from 10 hertz to 500 hertz. The IC610MDL155 weighs approximately 120 grams (0.26 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Brand | GE Automation Fanuc / Emerson Automation |
Series | Series One |
Part Number | IC610MDL155 |
Description | Source output module |
Number of I/O points | 8 outputs |
Output groups | 2 with 4 circuits in each group |
Rated voltage | 24 volts DC |
Output voltage range | 5 to 24 VDC |
Fuses (Internal) | 2 x 3 amp (in output common line, one for each group of 4 circuits) |
Output current | 0.5 amps maximum per point |
Output voltage drop | 1 volt |
Output leakage current | 0.1 mA at 24 Vdc |
On/Off response time | 100 microseconds |
Internal power consumption | 30 mA maximum at 9 VDC, Supplied by rack power supply |
Weight | 120 g (0.26 lb) |
Question: Does Automation Stop offer repairs on the IC610MDL155?
Answer: Yes. We offer repairs for the IC610MDL155 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC610MDL155?
Answer: If you buy the IC610MDL155 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC610MDL155 online?
Answer: Yes. Automation Stop sells the IC610MDL155 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC610MDL155?
Answer: The IC610MDL155 is made by Emerson - GE Fanuc.
Question: What Brand is included with the IC610MDL155?
Answer: The IC610MDL155 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What Description is included with the Rockwell Automation IC610MDL155?
Answer: The Rockwell Automation IC610MDL155 has a Source output module Description.
Question: What is the Fuses (Internal) of the IC610MDL155?
Answer: The IC610MDL155 has a Fuses (Internal) of 2 x 3 amp (in output common line, one for each group of 4 circuits).
Question: What Internal power consumption does the Rockwell-Automation IC610MDL155 have?
Answer: The Rockwell-Automation IC610MDL155 has a Internal power consumption of 30 mA maximum at 9 VDC, Supplied by rack power supply unit.
Question: What is the Number of input/output points of the Allen Bradley Automation IC610MDL155?
Answer: The Allen Bradley Automation IC610MDL155 has a Number of input/output points of 8 outputs.
Question: What is the On/Off response time of the IC610MDL155?
Answer: The On/Off response time of the IC610MDL155 is 100 microseconds.
Question: What is the Output current of the Allen Bradley/Rockwell Automation IC610MDL155?
Answer: The IC610MDL155 has a Output current of 0.5 amperes maximum per point.
Question: What Output groups does the Allen Bradley Automation IC610MDL155 have?
Answer: The Output groups of the IC610MDL155 is 2 with 4 circuits in each group.
Question: What is the Output leakage current of the Allen Bradley IC610MDL155?
Answer: The Output leakage current of the IC610MDL155 is 0.1 mA at 24 Vdc.
Question: What Output voltage drop does the IC610MDL155 have?
Answer: The Output voltage drop of the Allen Bradley IC610MDL155 is 1 volt.
Question: What is the Output voltage range of the Allen-Bradley IC610MDL155?
Answer: The Output voltage range of the Allen-Bradley IC610MDL155 is 5 to 24 VDC.
Question: What is the part Number of the IC610MDL155?
Answer: The part Number of the IC610MDL155 is IC610MDL155.
Question: What is the Rated voltage of the IC610MDL155?
Answer: The Rockwell Automation IC610MDL155 has a Rated voltage of 24 volts DC (direct current).
Question: What is the Weight of the Rockwell-Automation IC610MDL155?
Answer: The Rockwell-Automation IC610MDL155 has a Weight of 120 g (0.26 lb).
For additional information about IC610MDL155 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC610MDL155.
Revision Part # | Also Known As | Availability |
---|---|---|
IC610MDL155A | IC610MDL155 Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.