GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC610PRG100 |
Series: | Series One |
UPC: | 921202275662 |
Description:
GE Fanuc's handheld programmer module, part number IC610PRG100, is a simple push-button and display unit that lets users modify previously entered logic and displays the current status of internal timers/counters, as well as any previously input logic. It can be attached permanently to the CPU via a 5-foot cable or removed without interfering with the CPU's operation for future usage. It draws about 250 milliamperes of current from the processor's power supply.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC610PRG100 is a hand-held programmer module for GE Fanuc's Series One programmable controller series. This module is a basic push button and display device designed for portability and durability. This module allows users to make modifications to previous logic. It even displays the current state of any internal timers or counters. This module can display any previously entered logic, as well. It can be permanently attached to the central processing unit (CPU) or removed without interfering with the CPU's functionality for future use. It is connected with the CPU by a cable with a length of approximately 5 feet, or 1.5 meters. It may be installed on the exterior of a panel or console for flexible temporary use. Its connector inserts into the CPU's receptacle (socket) and snaps onto the power supply. This module consumes 250 milliamperes at + 5 volts from the power supply.
When mounted on the CPU module, this programmer module offers an auxiliary tape port for memory uploads to peripheral devices. Tape recordings of user programs may be created on almost any audio cassette recorder and used to initialize any CPU to that program once recorded. As a result, programs may be created once and then transferred to different CPUs without having to be manually re-entered. Once input, they may be modified if further customization is desired. If a tape record was created, in the event that a CPU breaks, a replacement can be installed and immediately reloaded to execute precisely the work that its predecessor was performing.
Question: Does Automation Stop offer repairs on the IC610PRG100?
Answer: Yes. We offer repairs for the IC610PRG100 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC610PRG100?
Answer: If you buy the IC610PRG100 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC610PRG100 online?
Answer: Yes. Automation Stop sells the IC610PRG100 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC610PRG100?
Answer: The IC610PRG100 is made by Emerson - GE Fanuc.
For additional information about IC610PRG100 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC610PRG100.
Revision Part # | Also Known As | Availability |
---|---|---|
IC610PRG100B | IC610PRG100 Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.