GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC600CB525 |
Series: | Series Six |
UPC: | 957715969453 |
Description:
Part number IC600CB525 is an advanced logic control module, also known as a control board module. This device is a product of Emerson - GE Fanuc. The primary purpose of this device is to provide a serial data link between the CPU of a PLC controller and a range of other devices. This logic control module supports master and slave protocols. The data rate of this product ranges from 110 to 19.2 kilobits per second (Kbps).
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC600CB525 is an advanced logic control module known as the control board module. It is designed and manufactured by Emerson - GE Fanuc. This logic control module provides a serial data link between a PLC controller's CPU and a range of other devices. For example, for PLC-6, devices such as CCM2, 3, and I/O CCM are compatible with this advanced control module. Likewise, the data communications unit (DCU) is available for Series One and One Plus of the PLC. In addition, for PLC 3, a data communications module (DCM) fits this product. It has two (2) serial ports that users can control independently. RS-232 and RS-422 serial interfaces are compatible with this module on both ports. These ports offer asynchronous communications with data speeds of up to 19.2 Kbps.
On the other hand, the DIP switches are also available to select their independent requirements. The data rate ranges from 110 to 19.2 kilobits per second (Kbps). For the present loop operation on port 1, the highest transmission rate is 4800 Kilobits per second (Kbps). In addition, this logic control module supports master and slave protocol. This module is also fitted with the CCM mode. RTU slave mode for the remote terminal unit (RTU) is also functional on this module. Even more unusual, there is no parity. It only requires two (2) ports with a turn-around delay of zero (0) to five hundred (500) milliseconds. In brief, this device is a reliable product that has a durable design and high performing applications.
Question: Does Automation Stop offer repairs on the IC600CB525?
Answer: Yes. We offer repairs for the IC600CB525 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC600CB525?
Answer: If you buy the IC600CB525 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC600CB525 online?
Answer: Yes. Automation Stop sells the IC600CB525 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC600CB525?
Answer: The IC600CB525 is made by Emerson - GE Fanuc.
For additional information about IC600CB525 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC600CB525.
Revision Part # | Also Known As | Availability |
---|---|---|
IC600CB525N | IC600CB525 Series N, Rev N | Request a Quote |
IC600CB525P | IC600CB525 Series P, Rev P | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.