GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC600CB536 |
Series: | Series Six |
UPC: | 961300307469 |
Description:
The IC600CB536 control module is a Type 2 communication control module that is made by GE Fanuc. This module is part of the series six of communications control modules (CCMs). This module can be used with both multidrop and point-to-point system types. Direct multidrop is used when the last slave device and the master device are not more than 4000 feet apart. Cables of high quality should be used for this communication distance.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
GE Fanuc makes the IC600CB536 communication control module as part of its Series Six line. This is a Type 2 connectivity controlling unit. This module can be set up to work with two different types of systems: multidrop and point-to-point. It is possible to connect up to two devices in a point-to-point configuration on the same communication line. The RS-232 or RS-422 ports on the computer then connect the two devices. Also, modems can be used to send data across long distances. You can connect more than two devices to a similar connectivity setup when you use a multidrop configuration to connect them. Set up the host device as the master and one or more IC600CB536 communication control modules as slaves to work with the host device. Some other point is that the device could indeed start communication, however, the slave gadgets can't. This is because the master device can. It can be used with RS-232 modems, RS-422 modems, and RS-232 radio transmitters and modems. To connect the GE Fanuc IC600CB536 communication module to the final slave device, which is less than 4000 feet away from the master device, the RS-422 direct multidrop arrangement is used, which works with the GE Fanuc IC600CB536 communication module. It's meant to be able to manage both high-quality cables and noisy surroundings, but it's not a necessity. If you want to connect up to eight slave devices in a multidrop or daisy-driven framework, you can also use the RS-422 connection option. It's not just two-wire and four-wire versions that are available. The RS-422 line can also be used. To communicate over a long distance, this communication control module is connected to a network of modems called RS-232. These modems are like long telephone lines. You can see how many slave units you can have on your screen thanks to your modem's abilities.
Question: Does Automation Stop offer repairs on the IC600CB536?
Answer: Yes. We offer repairs for the IC600CB536 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC600CB536?
Answer: If you buy the IC600CB536 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC600CB536 online?
Answer: Yes. Automation Stop sells the IC600CB536 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC600CB536?
Answer: The IC600CB536 is made by Emerson - GE Fanuc.
For additional information about IC600CB536 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC600CB536.
Revision Part # | Also Known As | Availability |
---|---|---|
IC600CB536L | IC600CB536 Series L, Rev L | Request a Quote |
IC600CB536M | IC600CB536 Series M, Rev M | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.