GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC600PM503 |
Series: | Series Six |
UPC: | 152365525114 |
Description:
The IC600PM503 is a high-capacity I/O power supply with a voltage range of 115 to 230 Volts. The power supply terminal is manufactured by GE Fanuc for powering high capacity I/O modules from Series Six PLC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC600PM503 is a high capacity I/O rack power supply manufactured by GE Fanuc. This power supply module is a high-capacity terminal that has a voltage range of 115 to 230 Volts AC and a frequency range of 50 to 60 Hertz. The terminal has a current rating ranging from 1.5 Amperes to 1.75 Amperes. The IC600PM503 rack power supply is used for powering high capacity I/O modules from GE Fanuc’s Series Six PLC system. The front of the IC600PM503 terminal has a power On/Off lever that is used for turning the power supply on or off. LED indicators on the terminal that show the power flow in the rack are present on the front of the terminal. The module needs to be handled carefully to avoid damage, electrical hazards, and shocks. The IC600PM503 power supply has been listed with UL and the terminal can meet industrial and environmental standards. For global usage, the power supply is also CE certified. The operating temperature range of the module is between zero (0) and 60 degrees Celsius.
The IC600PM503 power supply can provide regulated power of +5, +12, and -12 Volts DC voltage to the I/O rack backplane with a current rating of 16.5 Amperes. The module is suitable for use in different applications and users can troubleshoot the terminal easily. It also has a power failure signal indicator to help the users respond to various failures. The unit needs to be installed in a clean, dry place with no EMC noise trace. It is not waterproof and is an indoor unit.
Voltage | Between 115 to 230 Volts AC |
Frequency | 50 to 60 Hertz |
Current Rating | 1.5 and 1.75 Amperes |
Operating Temperature | Between 0 and 60 degrees Celsius |
Weight | 9.00 lbs |
Dimensions | 12.46 x 9.00 x 2.75 (inches) |
Storage Temperature | -20 degrees Celsius to + 80 degrees Celsius |
Humidity | 5% - 95% (non-condensing) |
Input | 95 - 130 Volts AC, 700 milliamperes |
Output | +5 Volts DC, 6.1 A (maximum) |
Question: Does Automation Stop offer repairs on the IC600PM503?
Answer: Yes. We offer repairs for the IC600PM503 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC600PM503?
Answer: If you buy the IC600PM503 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC600PM503 online?
Answer: Yes. Automation Stop sells the IC600PM503 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC600PM503?
Answer: The IC600PM503 is made by Emerson - GE Fanuc.
Question: What Current Rating does the Rockwell-Automation IC600PM503 have?
Answer: The IC600PM503 has a Current Rating of 1.5 and 1.75 Amperes.
Question: What is the Dimensions of the Allen Bradley-Rockwell Automation IC600PM503?
Answer: The IC600PM503 has a Dimensions of 12.46 x 9.00 x 2.75 ((in)).
Question: What is the Frequency of the Allen-Bradley IC600PM503?
Answer: The IC600PM503 has a Frequency of 50 to 60 Hertz.
Question: What Humidity does the Allen Bradley-Rockwell Automation IC600PM503 have?
Answer: The Allen Bradley-Rockwell Automation IC600PM503 has a Humidity of 5% - 95% (non-condensing).
Question: What is the Input of the IC600PM503?
Answer: The Input of the Allen Bradley IC600PM503 is 95 - 130 Volts AC (alternating current), 700 milliamperes.
Question: What is the Operating Temperature of the IC600PM503?
Answer: The Allen-Bradley IC600PM503 has a Operating Temperature of Between 0 and 60 degrees Celsius.
Question: What is the Output of the IC600PM503?
Answer: The Rockwell Automation IC600PM503 has a Output of +5 Volts DC, 6.1 A (maximum).
Question: What is the Storage Temperature of the IC600PM503?
Answer: The Storage Temperature of the IC600PM503 is -20 degrees Celsius to + 80 degrees Celsius.
Question: What is the Voltage of the IC600PM503?
Answer: The IC600PM503 has a Voltage of Between 115 to 230 Volts AC (alternating current).
Question: What is the Weight of the Allen Bradley Automation IC600PM503?
Answer: The Allen Bradley Automation IC600PM503 has a Weight of 9.00 lbs.
For additional information about IC600PM503 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC600PM503.
Revision Part # | Also Known As | Availability |
---|---|---|
IC600PM503B | IC600PM503 Series B, Rev B | Request a Quote |
IC600PM503K | IC600PM503 Series K, Rev K | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.