GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC600WD005 |
Series: | Series Six |
UPC: | 890409053826 |
Description:
GE Fanuc?s IC600WD005 is a 5-meter I/O expansion cable with 16 twisted pair color-coded wires. This cable is compatible with Series 90-70 Programmable Controllers. Its outer diameter measures 11.8 � 0.5 mm, while the supported cable size is 22 AWG. This cable is equipped with a 37-Pin D-Type connector on either end. These include one female and one male connector with a removable shell. This cable is housed in a PVC jacket with an insulation rating of 300 volts.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Emerson - GE Fanuc IC600WD005 is an I/O expansion cable for the Series 6 PLC systems. This cable has a length of 5 meters, or the equivalent of 1.5 feet. The cable’s conductor size is specified at 22 AWG, and its external diameter measures 11.8 ± 0.5 millimeters, or 0.465 ± 0.020 inches. This I/O cable consists of 16 twisted pair wires with overall shielding. The conductor pairs are color-coded for convenient identification and troubleshooting. The cable is designed with two (2) 37-Pin D-Type connectors (one male, one female connector). The male connector end of the cable typically connects to the upstream module, whereas the female connector end connects to the downstream module. The connectors come with a removable screw-on shell for easier insertion and connection to a module. The expansion cable jacket is composed of PVC material allowing for a 300-volt insulation rating. This cable can operate within temperatures of -20 ºC to 80 ºC.
The IC600WD005 I/O expansion cable is designed to provide rack to rack electrical continuity for the parallel I/O Bus in local, central processor unit (CPU) and remote I/O stations. It is compatible with Series 90-70 programmable controllers by GE Fanuc. Additional benefits of the I/O expansion cable include increased flexibility in Series 6 setups and simplified troubleshooting. The expansion cable can also be used to link a local I/O station to a CPU or another local I/O station on the Bus. The cable is specifically designed for a GE Fanuc I/O control module, I/O receiver and transmitter modules, auxiliary I/O module, and the downstream port of a remote receiver I/O module.
Question: Does Automation Stop offer repairs on the IC600WD005?
Answer: Yes. We offer repairs for the IC600WD005 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC600WD005?
Answer: If you buy the IC600WD005 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC600WD005 online?
Answer: Yes. Automation Stop sells the IC600WD005 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC600WD005?
Answer: The IC600WD005 is made by Emerson - GE Fanuc.
For additional information about IC600WD005 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC600WD005.
Revision Part # | Also Known As | Availability |
---|---|---|
IC600WD005A | IC600WD005 Series A, Rev A | Request a Quote |
IC600WD005B | IC600WD005 Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.