GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC660BBD023 |
Series: | Genius I/O |
UPC: | 34041757128 |
Description:
GE Fanuc designed and manufactured the IC660BBD023. This module is a 16-circuit source/sink I/O block that can interface to a large variety of discrete DC sensors and actuators. This block contains 16 discrete circuits which can be used as input or output. This module is a member of the Series 90-30 product line. This module has physical dimensions that measure 22.44 cm x 9.05 cm x 4.42 cm. The approximate weight of this module is 4 pounds, or 1.8 kilograms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC660BBD023 is a 16-circuit source/sink I/O block that was designed and manufactured by GE Fanuc as a part of the Series 90-30 PLC line of products. This device requires 24 to 48 volts of direct current (DC). Two (2) direct current 16-circuit source blocks and two (2) DC 16-circuit sink blocks are included. This block has two or three connected solid-state sensors and an electromechanical interface. The adjustable input filter time ranges from 10 milliseconds to 100 milliseconds. The IC660BBD023 has a number of characteristics, including output pulse test capabilities, variable input filter time, electronic short circuit protection, and over-temperature protection. These blocks also provide diagnostic features such as failed switch detection, open-wire identification for tri-state inputs, overload detection, and shutdown and no-load detection. This 1.8-kilogram block can work in temperatures ranging from 0 to 60 degrees Celsius. During installation, a protective box and a proper atmosphere must be employed. It implies that there should be no pollution in the air, as well as adequate cooling and air movement. A dependable grounding system is also necessary. When wiring the terminals, number 12 or 2 and number 14 wires are recommended. A portable monitor and CPU are required to correctly set up the IC660BBD023. The extensive diagnostics of the block can identify the root causes of installation and run-time issues. These blocks are backward compatible with prior block versions of the same kind and are compatible with all sorts of portable displays. However, if a matching electronics assembly is available, this DC block can replace all of its preceding variants. The control power is produced from the voltages of the input/output devices attached to the terminals. As a result, there is no need for a separate block power supply.
Question: Does Automation Stop offer repairs on the IC660BBD023?
Answer: Yes. We offer repairs for the IC660BBD023 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC660BBD023?
Answer: If you buy the IC660BBD023 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC660BBD023 online?
Answer: Yes. Automation Stop sells the IC660BBD023 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC660BBD023?
Answer: The IC660BBD023 is made by Emerson - GE Fanuc.
For additional information about IC660BBD023 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC660BBD023.
Revision Part # | Also Known As | Availability |
---|---|---|
IC660BBD023F | IC660BBD023 Series F, Rev F | Request a Quote |
IC660BBD023K | IC660BBD023 Series K, Rev K | Request a Quote |
IC660BBD023U | IC660BBD023 Series U, Rev U | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.